Dissertation > Excellent graduate degree dissertation topics show

Vacuum metallurgical purification of high alumina doped monocrystalline silicon tailings

Author: LiZhiHong
Tutor: MaWenHui
School: Kunming University of Science and Technology
Course: Physical Chemistry of Metallurgy
Keywords: tailing material multi-crystalline silicon directional solidification vacuum evaporation
CLC: TF13
Type: Master's thesis
Year: 2009
Downloads: 42
Quote: 0
Read: Download Dissertation

Abstract


Nowadays, most of manufacturers and research organizations for polycrystalline silicon production around the world are thinking about the low-cost manufacture procedure into their consideration. It is highly regarded in a wide range that, to obtain solar grade polycrystalline silicon by using metallurgical method to purify the remnants of mono-crystalline silicon production.To gain high-purity polycrystalline silicon from mono-crystalline silicon tailing material, one strategy based on vacuum directional solidification technique is used to purify tailing material of Al-doped P-type mono-crystal silicon. ICP-AES (Inductively coupled plasma-atomic emission spectrophotometry) analysis is used to detect the concentration of aluminum. The analysis results indicate that the concentration of aluminum increases along the longitudinal direction from bottom to the top of ingot, and the impurities are remarkably eliminated. Optical metallographic microscope patterns, XRD (X-ray diffraction) and EBSD (Electron Back Scattering Diffraction) statistic diagrams illustrate the behaviors of crystal growth during the purification processes. And microstructure of polycrystalline silicon is also a very importance research point.

Related Dissertations

  1. Numerical Simulation in Directional Solidification of Steel Ingot and the Study of Insulation Effect by Hollow Sidewall,TG111.4
  2. Structuresand Propertiesand Quality of Tialalloy Billets Directionally Solidified with Cold Crucible,TG111.4
  3. Solidification Microstructure of Ternary Eutectic Al-Ni-Y Alloy Directionally Solidified,TG146.21
  4. Studies of NiCuZn Ferrite Powders and Films Prepared by Sol-Gel Method,TM277
  5. The Study on Dislocation in Casting Multicrystalline Silicon and It’s Eliminating by Heating Treatment,TM914.4
  6. Comparative Analysis of Isothermal and Cellular Coupled Growth between Directionally Solidified Fe-Ni and Cu-Ge Peritectic Alloys,TG111.4
  7. Microstructure Evolution of Ti-45Al-5Nb Alloy during Directional Solidification,TG111.4
  8. Defects in metallurgical silicon and phosphorus gettering experimental study,TM914.4
  9. High Temperature Deformation and Fracture Behavior of Complex Microalloyed Ti-Al Alloys by Directional Solidification,TG146.23
  10. Microstructure Evolution and Electrochemical Corrosion Behavior of Directionally Solidified FeCoNiCr Based Multi-principal-element Alloys,TG111.4
  11. Containing Nb, RE and Si, TiAl alloy ingots cold crucible side directional solidification,TF807
  12. Preparation and Structures Analysis of Directionally Solidified Tial-Based Alloy Slab by Cold Crucible Method,TG111.4
  13. Microstructure Evolution of Directionally Solidified Ti-46Al-1.5Mo-1.2Si Alloy,TG146.23
  14. Microstructure Evolution of Directionally Solidifiied Ti-53at%Al Peritectic Alloy,TG111.4
  15. Numerical Calculation and Structures Study of Tial-Based Alloy Directionally Solidified by Rectangular Cold Crucible,TG244.3
  16. Directional solidification of AZ91 magnesium alloy technology and organization,TG111.4
  17. Liquid-liquid Structure Transition and Its Effect on Solidification: SnSb Investigated,TG111.4
  18. Study on the Electrochemical Properties of Pb-sb for Lead-acid Batteries,TM912
  19. Microstructure Evolution of Directionally Solidifiied Cu-20wt.%Sn Peritectic Alloy,TG111.4
  20. Alnico magnetic alloys (LNG) cold crucible directional solidification Preparation Process,TM273

CLC: > Industrial Technology > Metallurgical Industry > Metallurgical Technology > Vacuum metallurgy
© 2012 www.DissertationTopic.Net  Mobile