Dissertation > Excellent graduate degree dissertation topics show

Study on the Controller of Circulation Gas Blower

Author: LiZuoMin
Tutor: JinBo
School: Zhejiang University
Course: Mechanical Engineering
Keywords: Circulation Gas Blower Hydraulic Coupling Transmit Pipe Close-Loop Control Technical Revamp
CLC: TF321
Type: Master's thesis
Year: 2010
Downloads: 33
Quote: 0
Read: Download Dissertation

Abstract


The Circulation Gas Blower for CDQ furnace of Steel-Making Plant of Baoshan Iron & Steel Co., Ltd. was a very important equipment which furnished circulating nitrogen for coke cooling. The circulation gas volume, which was the base of in-furnace gas circulation, made great sense to the Dry Coke Quenching Process and had a direct influence on the temperature of coke exhaust and the temperature of boiler entry. A quick response of rotational-speed adjustment of The Circulation Gas Blower against set points was required by the Dry Coke Quenching Process.The Hydraulic Coupling, whose controller, an early 1990’s product, was imported from Japan, have been adopted for speed-adjustment by The Circulation Gas Blower for CDQ furnace of PhaseⅡproject in Baoshan Iron & Steel Co., Ltd. The speed control mode in this case was open-loop. The controller could only adjust the position of transmit pipe, due to which a relative severe hysteresis loop could be avoidless after long-term use.Author of this paper has developed the research work for the controller of Circulation Gas Blower against the existing problem and fulfilled the development for the controller of Circulation Gas Blower on the basis of SCM (single chip microcomputers), incl. hardware development, software programming and the research of control methods. This controller was finally put into application on site and enjoyed good reputation.The first chapter mainly expounded the development background of The Circulation Gas Blower controller as well as the main control methods adopted for Large Lag System home and abroad.The second chapter mainly expounded the design and development for the hardware of The Circulation Gas Blower controller, incl. design for power panel, central controller board, and peripheral circuit as well as the revamp-work of site circuit regarding to the application of this controller.The third chapter mainly expounded the design and development for the software of The Circulation Gas Blower controller, incl. software general design, setting of parameters and the development of controller monitor software.The fourth chapter mainly expounded the control strategy research of The Circulation Gas Blower, incl. research on PID control on basis of particle swarm algorithm and open-close loop speed feedback control on basis of prior knowledge as well as the final application condition on site.The fifth chapter was mainly the conclusion and prospect of this paper.

Related Dissertations

  1. Research on Combustion Close-loop Control of Diesel Engine Based on In-cylinder Pressure,TK427
  2. Study on Characteristics of A Microfluidic Close Loop Focusing System Based on Valveless Micropumps,TH137.7
  3. Research of the PID Control Method in Robots,TP242
  4. Research of Rotary Speed Fuzzy Control System on Variable Hydraulic Couplings Based Switch Valves,TH137.331
  5. High-energy Ignition System for Electronic Lean Burn CNG Heavy-Duty Commercial Engine,U463.64
  6. Research and Development of DC Dynamic Voltage Restorer,TM761.1
  7. Study on Automatization Control System of Welding with Trailing Peening Equipment Based on Electromagnetism,TP273
  8. Research and Design of 30kVA Medimum Frequence Inverter Power Supply,TM464
  9. Study on Hydraulic Coupling CAD Expert System,U664.2
  10. Research and Development of Soft Starting and Regulating Speed Controller for Belt Conveyor,TD634.1
  11. An Application of Z-Source Inverter as a Grid-connected Power Conditioner,TM464
  12. The Design and Operation of the Hydraulic Keyless Connection,TH131
  13. The Autoleveller Simulation of Drawing Frame Based on VSGPC,TP391.9
  14. A Design for Improvement of Electrical Control System on B220 (2×6M) Frame Planer,TG551.2
  15. Research on Regulation and Control of Variable Speed Fluid Couplings in Dual Engines Drive System,TH137.331
  16. Experiment Research and Fuzzy Controlling Method on the Fan Speed- Regulated System Using Variable Speed Coupling,TH137.331
  17. Research on BLDCM Elevater Door Control System,TM33
  18. Research on the Algorithm of Reactive and Harmonic Currents Compensation by Active Power Filter,TM76
  19. CNC winding machine process parameters Control Method,TG659
  20. Characteristic Analysis of Variable Hydraulic Coupling,TK223

CLC: > Industrial Technology > Metallurgical Industry > Metallurgical machinery,metallurgical production automation > The ironmaking mechanical and production automation > Ironmaking mechanical
© 2012 www.DissertationTopic.Net  Mobile