Dissertation > Excellent graduate degree dissertation topics show

Heating system and hot deformation parameters on the microstructure and properties of X80 pipeline steel impact study

Author: DuanLinNa
Tutor: CaoJianChun；LiuQingYou
School: Kunming University of Science and Technology
Course: Materials Science
Keywords: X80 Pipeline Steel Heating Temperature Mo Thermo-Mechanical Control Microstructures
CLC: TG335.11
Type: Master's thesis
Year: 2009
Downloads: 61
Quote: 0
Read: Download Dissertation

Abstract


Reheating condition affects the prior-austenite and solution of the micro-alloy elements directly in conventional hot rolling process. Moreover, it influences recrystallized austenite size, precipitation amount and state of carbonitride.The key point of hot rolling is to control rolling and cooling, for the different parameters influence room-temperature microstructure and the quality of product. It is very important to research reheating condition and hot deformation in laboratory for the practice production.In this thesis, the steel used in the test is a kind of low carbon high Ni X80 grade continuous casting slab. At first, effect of reheating temperature on prior-austenite size was studied; Next, the influence of TMCP (Thermo Mechanical Controlled Processing) parameters (deformation temperatures, deformation amount, final cooling temperatures and cooling rates) on the microstructures and properties are analyzed by using of Gleeble-1500D thermo-mechanical simulation machine; At last, effect of Mo on microstructures and properties of tested steel was obtained by comparing with the other no-containing Mo steel. As follows are the conclusions.(1) The prior-austenite grains grow with increase of reheating temperature, and coarse and asymmetric grains appear at 1200℃, but Nb has dissolved around 1150℃. In order to insure that Nb dissolve adequately and no obvious coarse grains in microstructures, the reheating technology of the steel should be controlled in 1 to 3 hours at about 1180℃.(2) The TMCP parameters have a great influence on the phase transformation of X80 pipeline steel. Under different processing conditions, the changes of the microstructures and M-A appear special rules. Along with the increase of cooling rates, microstructures of tested steel change from polygonal ferrite and quasi-polygonal ferrite to fine acicular ferrite and M-A islands are refined and dispersed at the same time. Along with the decrease of deformation temperatures, microstructures gradually refined and quasi-polygonal increase, but quantity of M-A islands decreases and M-A grains become small and smooth. Along with the increase of deformation amount, microstructures gradually refined and quasi-polygonal grains become small but quantity increases, amount of M-A islands increases and M-A grains become small and smooth. Along with the decrease of final cooling temperatures, microstructures of tested steel gradually refined, but quantity of M-A islands increases and grains become claviform.(3) Mo is able to not only refine microstructures, boost producing of acicular ferrite, and increase quantity of M-A, but also make transformation line of acicular ferrite in CCT curves right shift and extend cooling rates range of obtaining acicular ferrite.

Related Dissertations

  1. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  2. Study of Solid-Phase Extraction Coupled with Atomic Spectrometry for Separation and Preconcentration of Trace Metal Ions with Microcrystalline Anthracene,X832
  3. Mohist Thought of Military Science,E092
  4. Synthesis, Conformation and Character of W/Cu/S Supermolecule Clusters Containing Tp~* Group,O611.4
  5. High Efficiency Embedded Processor IP Core,TP332
  6. Packaging Light Extraction Efficiency Enhancement of LED Array Packaging with Various Micro-structures,TN312.8
  7. A Wonderful Work of Impressionism,J205
  8. Brief Discussion about Rhyme Flavor of Dear Brother, Don’t Worry on Your Way,J605
  9. Since the new century, western County Novels,I207.42
  10. Density Functional Theory Studies on the Structures and Electronic Properties of Mo and Mo2N Clusters,O561
  11. Influence of Rolling and Cooling Processes on Microstructures and Mechanical Properties of 500MPa Steel Strip for Automobiles,TG335.5
  12. Micro Ti pipeline weld heat affected zone properties,TG401
  13. Properties and microstructure of powder metallurgy molybdenum alloy hot forging,TG319
  14. Of TiC Reinforced relative Mo alloy mechanical properties and microstructure,TG146.412
  15. Design of Grinding and Polishing System for Thin-Walled Microstructures and Study on Processing,TG580.6
  16. Study on Temperature Distribution Mechanism and Structural Optimization in Micro-scale Warm Extrusion,TG376
  17. Selective Oxidation of Propane to Acrylic Acid over Mo-V-Sb-O Catalysts,TQ225.131
  18. Research on Preparation and Magnetic Properties of NdFeB/Mo Multilayered Films,TM273
  19. Numerical Investigation on Temperature Distribution of Aerodynamic Heating Surface with Liquid Nitrogen Cooling,TK124
  20. Mo P’U Design in Ming and Qing Dynasties,J524

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling process > Rolling method > Hot-rolled
© 2012 www.DissertationTopic.Net  Mobile