Dissertation > Excellent graduate degree dissertation topics show

Research on Hydro-Turbine Blade Hot Die Forming and Numerical Simulation

Author: YangYun
Tutor: WangZhaoYuan
School: Shanghai Jiaotong University
Course: Materials Processing Engineering
Keywords: hydro-turbine blade hot die forming blade unbending pressure center numerical simulation technology parameters optimization
CLC: TG376.2
Type: Master's thesis
Year: 2008
Downloads: 45
Quote: 0
Read: Download Dissertation

Abstract


Hydro-turbine blade is a key component of waterpower equipment. The hydro-turbine blade hot die forming technology is an advanced manufacturing method. The blade which is manufactured by hot die forming has many advantages compared with the“Casting-Shovel milling”blade and the CNC blade. It is in good shape, high quality, high mechanical performance and short production cycle. A brief introduction to the studying content and its results are as follows:The hot die forming of hydro-turbine blade and its key technical problems are introduced in detail. The key technical problems include the unbending of blade in hot plasticity status and the pressure center. A blade billet is obtained by using integrated geometry unbending method and finite element method unbending. The dynamic pressure center is also solved by using node-load method based on FEM. Meantime; the forming load is gained through the real-time tracking of Stroke-Load curve.A 3-D thermal-mechanical coupling FEM simulation model corresponding to the reality is set up for the hot die forming of the hydro-turbine blade. The 3-D FEA software DEFORM is used for numerical simulation of the blade hot die forming and the results have been obtained for deformed mesh, effective stress field, effective strain field, temperature field, velocity field, the status of contact area and stroke load curve at the end of hot die forming. Besides, the influence of effective stress, effective strain, and temperature under different velocity on the blade hot die forming process is obtained. The results reveal the laws of blade hot die forming.The maximum forming load is chosen as the optimal objective and the forming technology parameters are chosen as the design variables. By dint of Orthogonal experiment design and least square for nonlinear regression fit method, the multivariant nonlinear regression model between the objective function and the three design variables is established. Based on the above the model and direct-vision analysis of dummy Orthogonal experiment design results, the blade hot die forming technology parameters-velocity of top die is optimized. The optimal technology parameters-velocity of top die, which is 22.3mm /s, is obtained.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  9. Adult OSAHS Preoperative and Postoperative Nasal and Pharynx Cavity and Soft Palate of the Numerical Analysis of Fluid-structure Interaction,R766
  10. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  11. Study of Water-Inrush Danger Forecast of Coal Seam Floor Based on Multi Factor’s Fuzzy Clustering Approach,TD745
  12. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  13. Analysis of Shovel Welding Residual Stress Based on Finite Element Method,TG404
  14. Numerical Simulation and Research of Plate in the Process of Roller Quenching,TG156.3
  15. Numerical Simulation Analysis for Stamp-forming Process of Ultrathin Sheet Metal,TG386
  16. Studying on Dual-Ingot Low Frequency Electromagnetic Semi-Continuous Casting,TG292
  17. The Movement and Mixing Effect of Polymer Fluid in the Embedded Planetary-screws Extruder,TQ320.52
  18. Research on Gas Drainage Techonlogy Form Goaf of High Gas and Thick Coal Seam,TD712
  19. Fluid Dynamics Analysis and Research on the Spray Bar of Electrostatic Oiler,TG174.4
  20. Research and Analysis of the Formability on Hrs Substituting CRS of Automobile Inner Panel,TG386
  21. Simulation Analysis and N0 X Generation Forecast Based on Regenerative Car Type Heating Furnace,TG307

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Extrusion > Extrusion process > Hot extrusion
© 2012 www.DissertationTopic.Net  Mobile