Dissertation > Excellent graduate degree dissertation topics show

The Electric Design of Computer Numerical Controlled Water Jet Cutter with a Cantilever Beam

Author: SunZuo
Tutor: ZhaoDeAn
School: Jiangsu University
Course: Control Theory and Control Engineering
Keywords: High pressure water jet Servo System CNC system The programmable logic controller
CLC: TG659
Type: Master's thesis
Year: 2009
Downloads: 51
Quote: 0
Read: Download Dissertation

Abstract


The ultra - high pressure water jet technology in the 1970s developed a new type of practical techniques, since the inception of the technology , much attention , and in a very short period of time to obtain rapid development . At present, many domestic and foreign companies and academic institutions are engaged in the study of the application of this new technology . Many advantages and features of the high pressure water jet technology is making it an important development direction of the field of the 21st century cutting . This article developed a Nanjing earth waterjet Co. , Ltd. , the cantilever CNC water jet cutting machine as the research object , mainly for the following aspects of work : (1) set forth the basic working principle of CNC water jet cutting machine as a whole and pressurization system , while establishing the pressurization system simulink model , focusing on multi- turbocharger active commutation control simulink simulation results . (2) analysis of CNC machine tool servo system principle , servo system mathematical model, based on the model of the servo system dynamic and static performance analysis, mathematical model of a theoretical foundation for machine parameter settings and optimization . (3 ) FAGOR CNC system based on the selected external circuit design, to ensure that the CNC system to control the servo system movement . (4 ) Research CNC system built - in programmable logic controller basic principles of the work process and the structure of language , the design system required a variety of PLC control program . In order to test the machine's performance , Finally, the accuracy experiment . The precision data obtained show that the proposed design is fully compliant with the requirements of the project .

Related Dissertations

  1. Research on Gyro Stabilized and Tracking Platform,V241.5
  2. Several Key Issues on Closed-Loop Control for Precision Laser Tracking Device,TN249
  3. Research on the Synchronous Control Algorithm of a Special Target Simulator,TP273
  4. Sliding Mode Variable Tructure Control for Separating-Mirror System and Inhibit Chattering,TP273
  5. Design of Weapon Detection Device Control System,TP183
  6. The Multi-Application and Implementation of Auxiliary Control Network in Power Plant Desulfurization Systems,TP311.52
  7. Research of Software Way for Canopen-protocol’s Realization and Implantation in Servo System,TP273
  8. The Research and Development of the Numerial Control System for Hydraulic High-speed Turret Punch Press,TG385.1
  9. Study on Properties of Compound Dynamic Damper,TB535.1
  10. Aerocraft Simulator Servo System Controlling & Parameter Tuning Techniques,V249.1
  11. The Design of FDM Networked Control System Based on CAN Bus and Realization of G Code,TP273
  12. Based on DSP and CPLD design and implementation of motion control card,TP273
  13. NCUC-Bus fieldbus technology research and implementation,TP273.5
  14. Motion control card based open CNC system design and application,TG659
  15. Design and Research of the Rotary Head Numerical Control Bending Wire Machine,TG305
  16. Based on Virtual Instrument Simulation Load Test System Design,TP274
  17. Linear Servo System Based on thermoacoustic engine output characteristic simulation study,TM301
  18. Based on the ARM and Embedded Linux system prototyping CNC wire cutting,TG484
  19. Based on Labview and PLC intelligent synthesis loop testing systems research,TM506
  20. Research and Design of the De-weighting Controlling System of the Automatic Dynamic Balancing Machine,TH877
  21. Research and Development of Three-Dimension Engraving CNC System Based on DSP and FPGA,TG659

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile