Dissertation > Excellent graduate degree dissertation topics show

Research of New Gearless Traction Pumping Unit

Author: WangRui
Tutor: ZhangBingYi
School: Shenyang University of Technology
Course: Motor and electrical
Keywords: Pumping Unit PMSM Frequency Conversion Control PLC
CLC: TE933.1
Type: Master's thesis
Year: 2008
Downloads: 234
Quote: 0
Read: Download Dissertation

Abstract


One of focus points that study the energy-efficient field of pumping unit is the low speed electric motor which does not need the low speed organization direct drive. This kind of research of the pumping unit of organization has important scientific meaning and practical value. Domestic for this kind of pumping unit is in yet to start stage.This paper has analyzed the mechanical structures of novel gearless traction pumping unit, according to technical index and the major function of the system of pumping unit, also introduced the technical requirements of low speed and high torque PMSM. This generator supplies power with the SPWM power source of frequency conversion directly drives the drag of driving sheave to draw sucker rod and matches weight, being completed to take out oil demerit. This generator which does not need mechanical deceleration organization can make new the mechanical structure of novel gearless traction machine of pumping unit become very simple, have alleviated heavy daily maintenance work greatly, and increase systematic reliability considerably. Since having not slowed down structure, organization has no corresponding mechanical wastage, has raised systematic mechanical transmission efficiency greatly. On the other hand, because use high efficiency PMSM, the generator has reduced generator wastage and also enhanced the system overall efficiency.This paper uses Matlab calculation software establishment program to calculate the design scheme of oil field pumping unit with the 20kW low speed and high torque PMSM, then applies the Maxwell 2D two-dimensional finite element analysis software of electromagnetic field to carry out the analysis of magnetic field for PMSM, and has analyzed them in no load turn over electromotive force and the magnetism of air gap dense.This paper adopts electromechanical integration design for the control system of pumping unit of frequency conversion, PLC is the control core. This design realizes motor frequency control through control frequency converter. This paper has studied the motor control pattern of rotational speed, solved the mechanical impact problem in the inverting of pumping unit, and reduced mechanical wear. The PID closed-loop control for frequency conversion control system of pumping unit has been designed for realizing stroke, rush and about stroke time continuously adjustable in specified scope, this makes the pumping unit apply to the different operating mode oil well.The modeling and the simulation has been carried out to the novel gearless traction type pumping unit control system. The simulation result indicates that the model establishment is correct, the control method is feasible, these have offered good theoretical basis for this generator control systematic hardware parameter designs.

Related Dissertations

  1. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  2. Initial Rotor Position Estimation for PMSM,TM341
  3. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  4. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  5. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  6. Equipment Research of the Ship Sewage Treatment,X703
  7. The Roles of Phospholipase C and D in Xylanase-Induced Defense Responses in Suspension-Cultured Rice Cells,S511
  8. Design of Test System and Modeling of Electric Cylinder,TH137.51
  9. The Design of Digital Control System and the Experimental Study of Flow Characteristics of EEV,TH134
  10. PLC Control System Design of the Wet Spraying Machine,TU69
  11. The Design and Implementation of the Control System for PMSM Based on DSP,TM341
  12. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  13. Gantry planer simulation equipment design,TG551.2
  14. The Design of Monitoring System and Experimental Study of the Solar Assisted Heat Pump Unit with Cooling, Heating and Gaining Hot Water,TK511.2
  15. Design of Servo-Control System of PMSM Based on IRMCK201,TM341
  16. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  17. Control System Design for Position Sensorless Permanent Magnet Synchronous Motor,TM341
  18. The Study of the Monitoring System of the Hydraulic Disc Brake,TD534.6
  19. Simulation Research on the Energy Saving Control Technology for Motor Based on Simplorer,TM343
  20. The Design and Implementation of the Automation Management System of Yongchangjing River,TP315
  21. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273

CLC: > Industrial Technology > Oil and gas industry > Oil machinery and equipment and automation > Oil and gas production machinery and equipment > Pumping mechanical equipment > Pumping
© 2012 www.DissertationTopic.Net  Mobile