Dissertation > Excellent graduate degree dissertation topics show

Application Study on FBG Sensing Technology in Bridge Health Monitoring

Author: SunShouWang
Tutor: ZhouZhi
School: Harbin Institute of Technology
Course: Structural Engineering
Keywords: FBG structure health monitoring temperature compensation cable load cell installation techniques Tianjin Yonghe Brige
CLC: U446.2
Type: Master's thesis
Year: 2007
Downloads: 316
Quote: 0
Read: Download Dissertation

Abstract


Structural Health Monitoring (SHM) has been the focus of researchers all over the world. And FBG has become one of the most important sensing element in SHM due to its advantages such as high precision, high durabilities, quasi-distributive sensing, electric-magnetic resistance, small size, convenience to integrate sensing network, etc. With the economic development in China, investment in infrastructures is almost half of that in the whole world, which provides opportunities for SHM and also FBG sensing techniques. In this paper, some key techniques of practical applications of FBG sensors have been studied as followed.Firstly, an absolute temperature compensation technique has been brought forward. And its reliability and accuracy has been tested based on the data of long-term experiments.Secondly, in order to monitor the tress state of structures in service, a novel sensibility-enhanced installation and measurement technique of stress induced by dead load technique have been given And they are also tested by experiments Thirdly, cable load cell based on FBG sensor has been developed and applied in in Beijing Chaobai bridge.Besides, the accuracy, reliability and stability of FBG strain sensors have been valued by finite element analysis, experiments and practical applications.Finally, FBG monitoring system for Tianjin Yonghe Brige has been set up and it has been used to monitor the stress of cables, main beam and prestressed reinforcement .

Related Dissertations

  1. Temperature Compensation and Auto-calibration of High-Precision Electronic Balance,TP274
  2. Research on FBAR and Its Oscillator,TN752
  3. Emissivity line measurement system software design and compensation algorithm,TP274
  4. FBG sensing structure, transfer characteristics and the contact force measurement,TP212.14
  5. Multi-layer multi sublattice study the physical properties of thin film materials,TB383.2
  6. FBG -based cable force sensors Development and Application,TU317
  7. Special multi-parameter sensing fiber grating and its application,TP212.14
  8. Blowers dynamic stress monitoring,TH44
  9. Micro inertial resistance to magnetic interference and temperature compensation method,V249.322
  10. Cremaster support accelerometer error modeling and compensation of temperature,TH824.4
  11. High-power commercial induction cooker control solutions,TM925.5
  12. Lock -style non- reciprocal ferrite phase shifter modeling , simulation and Fabrication,TP391.41
  13. Research of New Piezoresistive Sensor,TP212
  14. Analysis and Calibration of Three-axis Fluxgate Magnetometers Error,TH762.3
  15. Research of the Automobile Exhaust Detection System Based on ARM9,TP368.1;TP274
  16. Argon- oxygen refining ferroalloy furnace temperature detection method,TF33
  17. Study of Temperature Compensation of Selective Laser Sintering Processing Based on Temperature Field,TF124.5
  18. Design of Controller on Solar LED Lighting System,TM923.34
  19. Stand-alone PV system,TM912
  20. The Study of Cable’s Temperature Monitoring Systm Using Distributed Fiber Bragg Grating Based on ARM,TM247
  21. Research of the Temperature Drift Compensation Method of Piezoresistive Pressure Sensor,TH812

CLC: > Transportation > Road transport > Bridges and Culverts > Bridge test observations with the test > Bridge Observation and equipment
© 2012 www.DissertationTopic.Net  Mobile