Dissertation > Excellent graduate degree dissertation topics show

Research of Heat Transfer in Multilayer Insulation for Space Vehicles

Author: ZhangXiaoNing
Tutor: LiuLinHua
School: Harbin Institute of Technology
Course: Engineering Thermophysics
Keywords: multilayer thermal insulation gas conduction microscale radiation layer density pressure
CLC: V444.36
Type: Master's thesis
Year: 2007
Downloads: 394
Quote: 2
Read: Download Dissertation

Abstract


The space vehicle must undergo the extremely bad environment during the work process. In order to guarantee flight crew safety and make sure the inner apparatus normal work, it is necessary to establish insulation equipment to reduce the space vehicle interior temperature difference as much as possible. After several decade research, the thermal protection system’s develop have made rapid progress. Among the multitudinous thermal protection system plans, the metal thermal protection system was considered to be the first choice. In this dissertation, multilayer insulation system belongs to the metal thermal protection system.During the space vehicle moving in an orbit, the purpose of this dissertation is to mainly research the steady heat transfer in multilayer insulation system. Rarefied gas conduction and microscale radiation are considered as the main heat transfer way. It is a new idea to research microscale radiation in multilayer insulation system. The thermal analysis model is to be established using the finite difference method and the node analysis method. The former is that the energy equilibrium equation is domain discretized to set up the difference equation, and the latter is to establish the equations with the relation that heat-flux at each node is equivalent at steady state. Through calculating the example, the precision of the node analysis is higher than the finite difference method’s.In the multilayer insulation system design, the various parameters design is the most important. Numerical simulation is made for the objects with different parameters by the node analysis thermal model. Analyzing the layer density from two aspects, the layer density is increased when total thickness is invariable, and the layer density is increased when the total layer is invariable The calculation results are analyzed and the effects of parameters such as layer density, numbers of layer and vacuum degree are clarified. The results are helpful to the optimum design of the multilayer insulation system.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  3. Aerodynamic Performance Analysis of Low Pressure Turbine at Low Reynolds Numbers,V231.3
  4. Isolated systolic hypertension in patients with cardiac ultrasound characteristics of traditional Chinese medicine dialectical correlation exploration,R544.1
  5. Integrative treatment of elderly patients with hypertension TCM syndromes and quality of life,R544.1
  6. High Pressure Common Rail Diesel Engine Fueled with Biodiesel test under different atmospheric pressure,TE667
  7. Research the Relevant of Detection the Index of Rabbit Model of Intra-abdominal Hypertension and Intestinal Barrier Function.,R656
  8. Relation of the Effect on the Liver with the Changes of Intra-abdominal Pressure Gradient,R657.3
  9. Time pressure conditions on the direct effect of a belief that reasoning,B842.3
  10. Hot and humid environment simulated physical training to improve soldiers marching and weight 5km off-road capability of the armed,E251.1
  11. Physical exercise in obese high school students time management tendencies and the impact of academic pressure,G633.96
  12. The Value Simulation of the Filtration Process by Fiber Filter Materials,TB34
  13. The Design and Simulation for Pressure-control System of One Pressure Vessel,U661.7
  14. The Function of TNF-α in the Pressure Inducing the Expression of ADAMTS-4 in the Nucleus Pulposus Cells,R341
  15. Deep manned submersible pressure hull fatigue reliability analysis of titanium,U661.4
  16. A high-speed high-pressure hydraulic pump test bench implementation,TH137.51
  17. Low-voltage isolation switch housing Metal Casting Defect Analysis,TG249.2
  18. Analysis of Function and Structure of the New Hydraulic Cylinder Test-Bed and Research on Character of Pressure Control,TH137.51
  19. Research on the Dynamic Characteristics of High Speed Solenoid Valve for ABS,U463.526
  20. Study on the Road Performance of Asphalt Rubber Gravel Seal Coat,U414
  21. Development of Intelligent Vortex Flowmeter Based on HART Field Bus,TH814

CLC: > Aviation, aerospace > Aerospace ( Astronauts ) > Space instrument,spacecraft devices,spacecraft guidance and control > Auxiliary equipment > Environmental control and life support equipment > Thermal conditioning equipment
© 2012 www.DissertationTopic.Net  Mobile