Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation of Uncoupling Charge Blasting

Author: XuYanMing
Tutor: ZhangYunPeng
School: Hebei University of Technology
Course: Mining engineering
Keywords: uncoupling charge uncoupling coefficient blasting simulation LS-DYNA presplitting blasting
CLC: TD235
Type: Master's thesis
Year: 2009
Downloads: 46
Quote: 0
Read: Download Dissertation

Abstract


Uncoupling charge blasting is the major technical measures for presplitting and smooth blasting, and is the main means to form smooth rock wall and protect excavation face. On the basis of extensive reading literatures published in home and abroad, the principle of uncoupling charge blasting is expounded, and the properties of parameter determination in air and water uncoupling charge blasting are analyzed.3D single hole and 2D diplopore are modeled numerically using LS-DYNA, and the stress process of uncoupling charge blasting is reappearanced, and the stress cloud and time process curve of stress and displacement of blasting are educed. Pressure and breakage of hole wall in air and water uncoupling charge blasting are analyzed, and the functional relation of borehole pressure and uncoupling coefficient is educed. The difference of stress decay rate in air and water is compared; and axis stress in diplopore simultaneous blasting is analyzed.The numerical simulate results showed that for the rock with its ultimate compressive strength is more than 76MPa, the borehole can be protected effectively in air and water uncoupling charge blasting when the uncoupling coefficient K=2,3,4 and the detonator diameter is 5cm. The Borehole pressure showed exponential decay with the increase of uncoupling coefficient, and the decay in water is lower than in air. The tensile stresses of blast axis are no less than 4.2MPa when K=3, L=10-15d, and the detonator diameter is 5cm.

Related Dissertations

  1. Numerical Simulation Research on Optimal Milli-second Delay Time with Many Free Surfaces Hole by Hole Blast,TD235
  2. For small spacecraft cone - rod flexible wall docking mechanism design studies,V526
  3. High-speed cutting vibration compaction of soil and its numerical simulation of drag reduction,S222
  4. Numerical Simulation on the Penetration of Reinforced Concrete Targets,TU375
  5. The Structure Strength Analysis and Optimization Design of Impact Wheel for Impact Roller,U415.521
  6. CFRP Reinforcement Theory Analysis of Bridge Pier Columns with Large Diameter,U443.22
  7. Considering soil - structure interaction railway bridge height limit protective frame and the power of the ultra-high vehicle collision response analysis,U441
  8. Study on Properties of Solid Particle Erosion Resistance CrN_X Coating,TG174.44
  9. Research on the Mathematical Model of the Crepes Machine Roller Lateral Compressive Force Based on the Finite Element Analysis,TQ330.1
  10. Numerical Simulation Study on Blast Induced Collapse of Thin Wall Tubular Structures Using LS-DYNA,TU746.5
  11. Ice and the role of non-simultaneous destruction of the structure of the numerical simulation,U657
  12. The Numerical Simulation of Geological Applicability of Spoke Wheel,U455.43
  13. Numerical Simulation on SHPB Experiment for Rock,TU458
  14. Drilling Water Injection Pressure Impulses Crack Gas Drainage Technology Research,TD712
  15. Three-roll planetary rolling mill process force analysis,TG333
  16. 3D Dynamic Simulation Analysis of Thin-Wall Parts Forming Process Based on ANSYS/LS-DYNA,TG386
  17. New machinery tramcar anti- running device design and dynamics modeling and simulation,TD553
  18. Unstable Analysis and Collapse Simulation of Frame Construction by Blasting Demolition,TU746.5
  19. Analysis of Nonlinear Dynamic Response of Ship Structure under Impact Load,U661.43
  20. The structural strength of the skeleton of the car body and crash safety simulation,U463.82

CLC: > Industrial Technology > Mining Engineering > Mine design and construction > Drilling and blasting works > Blasting
© 2012 www.DissertationTopic.Net  Mobile