Dissertation > Excellent graduate degree dissertation topics show

The Preparation of MgCr2O4 Spinel Made by Molten-salt Method and Its Application in Fuel Gas Filter

Author: ZhouDeZhi
Tutor: FanHua
School: Nanchang University
Course: Environmental Engineering
Keywords: magnesia-chromate molten salt method Fuel Gas Filter
CLC: U464.13
Type: Master's thesis
Year: 2010
Downloads: 58
Quote: 0
Read: Download Dissertation

Abstract


Molten salt method is recently developed as a novel synthetic method for inorganic materials. Based on one or more low melting point salts as a reaction medium, which can be dissolved by the appropriate solvent, the reaction is easily carried out via the media and pure product can be obtained after filtering and washing. Due the advantages of the simple process, low cost and synthetic temperature, short reaction time and high stability in chemical compositions, molten salt method has been widely applied in different fields, such as in the synthesis of high melting point oxide powders, electronic ceramic powders and other functional powder materials.MgCr2O4 spinel powders were synthesized in NaCl and KCl molten salt media. The effects of different raw materials, such as heating temperature, holding time and different molten salt kinds on the performances of the products have been studied. The results indicated shows that both the chromic oxide and chromic salt can be combined with crystal magnesium and calcium carbonate to produce octahedral MgCr2O4 spinel. The materials--MgCl2·6H2O、CaCO3、Cr2O3、NaCl、KCl being heated under 900℃for 5hours, the crystal size distribution of MgCr2O4 spinel becomes equal in a octahedral form and such crystals grow complete. By contrast, the crystals of MgCrO4 spinel produced by Cr(NO3)3.9H2O and CrCl3.6H2O become octahedral, incomplete and irregular in form. With increase in heating process temperature and delay in soaking time, the crystallinity of MgCr2O4 spinel improves and crystal size increases, too. And MgCr2O4 spinel growth features Ea=10.01 KJ/mol in medium of NaCl fused salt. Through molten-salt method the produced cellular MgCr2O4 spinel ceramics can be used as the carrier of automobile exhaust katalyst, standard both in form and in grid size. And the cellular MgCr2O4 spinel has the advantage of more pores, even pore width and large surface area. Therein, the celluar magne siochromic can so evenly absorb and preserve the automobile exhaust katalyst as to provide conditions for perfect exhaust purified effect.

Related Dissertations

  1. Synthesis of ZnNb2O6 and ZnTa2O6 Ceramic Powders,TB383.3
  2. The Synthesis of Aluminate (Silicate) Materials by Molten Salt Process and Their Photoluminescence,TQ422
  3. The Research of the LiNi1/3Co1/3Mn1/3O2 for the Cathode Material of Li-ion Battery,TM912.9
  4. Synthesis and Application of New Photocatalyst for Wastewater Treatment,X703
  5. Study on Synthesis and Luminescent Properties of LaPO4:Eu3+ Nano-materials,TB383.1
  6. Controlled Synthesis, Characterization and Performce of Ceria or Yttria Micro/Nanostructures,TB383.1
  7. Molten salt prepared niobium , zinc - based microwave dielectric ceramics structure and properties of,TQ174.1
  8. The Study on Reaction Mechanism and Dynamics of MgO Preparation with Molten Salt,O614.22
  9. Study on Synthesis of Ba1-xSrx TiO3 （x=0–1） Superfine Powder Materials,TB383.1
  10. Study on Preparation and Properties of Potasium-sodium Niobate-based Piezoelectric Ceramics Prepared by Molten Salt Synthesis Method,TQ174.6
  11. New rare-earth pigments to pigment,TQ628.2
  12. Synthesis of Sodium Potassium Niobate Based Lead-Free Piezoelectric Ceramics and Their Textured Processing,TQ174.6
  13. Synthesis and Properties of the Tungstate Nanocrystals,TB383.1
  14. Many provinces and quinone high dielectric polymer synthesis and properties of,O631.3
  15. The Research on Magnesium Oxide Powders Preparation by Magnesium Chloride and Different Source of Calcium,TB383.3
  16. Study on Synthesis of BaTiO3 , SrTiO3 and Ba1-xSr xTiO3 Nanomaterials,TB383.1
  17. Preparation LiFePO_4 molten salt lithium ion battery cathode materials,TM912
  18. Studies on Molten Salt Approach and Low Temperature Sintering of ZnO-TiO2-based Microwave Dielectric Ceramics,TQ174.651
  19. Synthesis and Characterization of Perovskite Compound,TB383.1
  20. Synthesis and Properties of asymmetric dialkoxy substituted Province and quinone,O631.3
  21. Synthesis of Heat Insulation Material Used Natural Forsterite as Raw Material,TQ175.7

CLC: > Transportation > Road transport > Automotive Engineering > Automotive engine > Reciprocating engine > Components, parts
© 2012 www.DissertationTopic.Net  Mobile