Dissertation > Excellent graduate degree dissertation topics show

One-dimensional Core-shell Structured Multi-walled Carbon Nanotubes/Polyaniline Nanocomposites

Author: LiangXia
Tutor: ZhuMeiFang;QinZongYi
School: Donghua University
Course: Materials Science
Keywords: Carbon nanotubes Polyaniline Surface treatment Core-shell structure Doping effects
CLC: TB383.1
Type: Master's thesis
Year: 2008
Downloads: 70
Quote: 0
Read: Download Dissertation

Abstract


Multi-walled Carbon nanotubes (MWNTs) have attracted the fancy of many researchers due to their unique electrical and mechanical characteristics, as well as an extremely high aspect ratio with low density. The combination of MWNTs and conducting polymers into composite materials has been receiving interest as one-dimensional nanostructured materials, due to a large enhancement in the physical characteristics of electrical, thermal and structural properties as a result of interaction between the polymer and MWNTs. However, the MWNTs aggregate easily and are difficult to uniformly disperse in the polymeric matrix due to the strong van der Waals forces among the tubes, thus the MWNTs were generally treated with strong acidic solutions via a reflux process to eliminate impurities including metallic catalysts prior to the preparation. Unfortunately, such treatment always resulted in the damage of carbon nanotubes and formation of functional groups at defect sites of MWNTs.In this work, we describe a simple approach to purify the MWNTs by refluxing them in concentrated hydrochloric acid under low-power ultrasonic irradiation. It is found that the impurities including metallic catalysts absorbed on MWNTs can be efficiently removed prior to the preparation, and the characteristic of extremely high aspect ratio of MWNTs can be remained. During this refluxing process, carbon nanotubes with more structural defects would be broken into pieces, whereas outer layer with less structural defects was easy to peel off the MWNTs surface until the perfect surface appeared. The MWNTs treated for 15h at 70℃with less defects and more perfect structure were obtained.Then the nanocomposites with the aforementioned MWNTs and polyaniline were prepared by the in situ chemical polymerization of aniline on the carbon nanotubes using hydrochloric acid as an oxidant. The in situ polymerization of aniline in the presence of these well-dispersed nanotubes gave rise to a new tubular composite of carbon nanotubes having a uniform encapsulation of doped polyaniline. It was found that the mixing sequence of the initiator, the monomer and MWNTs strongly influenced the microstructure of the nanocomposites. The coated polyaniline layers in above-mentioned one-dimensional nanocomposites could be controlled easily by adjusting a feed ratio of aniline to MWNTs. It also was found the polyaniline on MWNTs surfaces gained obvious improvement on the structural order, molecular packing and delocalization of the charges in the material. For the ratio of MWNTs versus aniline monomer of 2:1, the resulting PANI could be completely assembled onto the surface of MWNTs with the thickness of the PANI shell layer of about 15-20nm, and the nanocomposites exhibited good thermal stability and electrical conductivity up to 28.46 (Ω·cm)-1.The Doping effects on the morphology, electronic conductivity, and thermal stability of the nanocomposites also were studied. It was demonstrated that strong n-n conjugation interaction between carbon nanotubes and polyaniline (PANI) caused by the doping effects led to PANI in emeraldine salt (ES) form closely wrapping onto the MWNT surfaces. However, the weakπ-π* conjugation interaction appeared due to the change of conformation of PANI in the subsequent de-doping process and the removal of aniline oligomer in emeraldine base (EB) form from the MWNT surfaces, and thus the loose core-shell structure formed for EB-MWNT. The improvement in the thermal stability of the nanocomposites was observed by replacing hydrochloric acid with sulphonic acid as the dopant. More attention should be paid to the unique influence of MWNTs on the delocalization of theπelectrons of PANI.

Related Dissertations

  1. Hydrothermal Synthesis of Oxide Hollow Spheres,TB383.4
  2. Multi-walled Carbon Nanotubes Au _AT_ of Pt, Au _AT_ of Pd core-shell structure of the catalyst preparation and electrochemical properties of,O643.36
  3. The Preparation of Polyaniline-Metal Complex and the Study on Its Catalytical Property,O634
  4. Preparation and Anticorrosion Properties of Doped Polyaniline/Epoxy Coating,TQ637
  5. Preparation and Property Study of Polyaniline/Polyester Composite Conductive Fabric,TS195.6
  6. Carbon Nanotubes Compound Polymer Film Modified Electrode and Its Application for Electroanalytical Chemistry,O657.1
  7. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  8. Polyaniline / short fiber reinforced natural rubber properties,TQ330.1
  9. SnO 2 / CNTs composite Controllable Preparation and Gas Sensitivity Study,TB383.1
  10. Preparation of polyaniline nanostructures , characterization and biomedical applications,TB383.1
  11. MWCNTs and ZnO / SnO 2 Composites and NO gas research,TB33
  12. Carbon fiber reinforced epoxy resin surface treatment and interfacial properties of composite materials,TB332
  13. Influence of Doping Effect on Zinc Oxide by First Principles Studies,O614.241
  14. Synthesis and Characterization of Polyaniline Micro/nano Structure and Its Composites,TB383.1
  15. Synthesis of Silver Nanoparticles on Modified Multi-walled Carbon Nanotubes and Their Antimicrobial Effects,TB383.1
  16. Preparation of Functional Multi-walled Carbon Nanotubes for Using in Electrochemical Capacitor Materials and Its Electrochemical Performance,TB383.1
  17. Preparation and Properties of Platinum-based Catalysts for Potential Use in PEMFCs,TM911.4
  18. Preparation and Properties of EVOH/Carbon Nanotubes Composite Micro/Nanofibers,TB383.1
  19. Surface Treatment of Polyacrylonitrile Based High Modulus Carbon Fibers,TB304
  20. The Preparation of Metallic Fabrics with PD-Free Activation and Research of Its Properties,TS106
  21. Polyaniline and carbonaceous material / Polyaniline Composite Electrochemical Properties of,TB383.1

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile