Dissertation > Excellent graduate degree dissertation topics show

System Optimization and Experiment Investigation of Induction Type Electromagnetic Launcher

Author: LiuFangMin
Tutor: GaoJunShan
School: Harbin University of Science and Technology
Course: Control Theory and Control Engineering
Keywords: Electromagnetic launch Traveling wave magnetic field Numerical simulation
CLC: O441.4
Type: Master's thesis
Year: 2008
Downloads: 123
Quote: 1
Read: Download Dissertation

Abstract


The electromagnetic launch is that when the electromagnetic force works,the electromagnetic energy is transformed into kinetic energy which is used to launch projectile (armature).The technology of electromagnetic launch has been a leap in the fields of propulsion technology in recent years.It has opened up a new avenue to meet the special requirements of propulsion with ultra high speed and big mass.Its merit of low propulsion cost has especially attracted the attention of all countries.The technology of electromagnetic launch is applied in the field of the national defense and civilian industries , such as aircraft launch system ,electromagnetic gun,linear electromagnetic induction pumping units,ramming machine and so on.In the course of the electromagnetic launch development,there are three basic types of the electromagnetic launcher: the track gun, the coil gun and the reconnection gun. The coil gun, which is also named as induction type electromagnetic launcher,can be interpreted as a cylindrical linear motor.Its characters are as follows:Because of the magnetic suspension effect,there is no fiction between tube and projectile in acceleration process;simple structure; wide range of launch quality;different shapes of the projectile;simple energy source ; high initial velocity ; good controllability and excellent performance.Therefore,only the coil electromagnetic launcher is researched in this paper.The process of the electromagnetic launch is a transient process,so the interaction between the stator windings and projectile varies with the change of time.Consequently,in order to design an electromagnetic launch system which has good working conditions,it is rather necessary to build a numerical simulation model.After analyzing the characteristic of driving coil circuit and kinematics,the system equation of the three stages electromagnetic launcher is built.The system equation is nonlinear constant differential equation.The projectile is equivalent to some slices,which makes the self-inductances,mutual inductances and mutual inductance gradient are closer to the actual situation. According to the symmetry of the parameters,the assignment table is used to decrease the calculation time.The Treanor algorithm,which has better stability,is used to solve the nonlinear constant differential equations,and the stable solution is obtained.A computer simulation program which is especially appropriate to the single stage coil gun is designed,and the simulation results satisfactorily agree with the experimental data.To enhance the projectile efficiency of the system,the discharge loop is improved.Experiment results indicate the projectile efficiency of the improved system increases when the energy equalizes.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Mathematical sciences and chemical > Physics > Electromagnetics,electrodynamics > Electricity and Magnetism > Electromagnetic waves and electromagnetic fields
© 2012 www.DissertationTopic.Net  Mobile