Dissertation > Excellent graduate degree dissertation topics show

Research on Brushless Doubly-fed Hybrid Poles Permanent Magnet Motor and Its Speed Regulating System

Author: WangZhen
Tutor: HuangZuoGang
School: Nanchang University
Course: Motor and electrical
Keywords: hybrid poles vector control speed regulating system EMF
CLC: TM351
Type: Master's thesis
Year: 2010
Downloads: 43
Quote: 1
Read: Download Dissertation


Brushless Doubly-fed Hybrid Poles Permanent Magnet Motor is a new type of Hybrid Excitation permanent magnet machine. Its control winding can regulate dual directional magnetic field, namely strengthening and weakening magnetic field. This great capability in regulating main magnetic field guarantees the wide speed range of the machine. The vector control strategy and excitation regulating capability of this novel machine are studied in detail. The speed regulating system that is use for a model machine manufactured by research group is designed and the relative experiments are also made in the paper.Based on the detailed introduction of structure, principles and magnetic characteristics of the machine, its mathematical model in the d-q synchronous reference frame is built in this paper. The vector control analysis about this machine is made by using the d-q model, and the vector control strategy which is suitable for this kind of machine are presented:vector control under conditions that direct axis current of power winding is equal to 0, vector control under conditions that power factor of power winding is equal to 1, and vector control based on stator magnetic field. All these vector control strategies are elaborated in the paper. The research results show that the machine which adopts the above-mentioned vector control methods has the better control performance of regulating speed and torque than general PMSM.The paper carries on the finite element analysis of the Brushless Doubly-fed Hybrid Poles Permanent Magnet Motor at its motoring state by making use of the electric-magnetic field calculating programs. The analysis results show that:When the machine runs as a motor, and whether the machine runs with load or not, its capability of excitation regulating can not meet the demand of performance. There are two reasons for this phenomenon:the width of stator magnet yoke is so small that the magnetic circuit is easily saturated, and the reactance of quadrature-axis is so large that stator voltage is increased. A new motor is designed by taking these two factors into consideration, and it has excellent performance of the field-weaking capability as well as of speed range.The governing system of the existing machine is designed based on the vector control method under the condition that direct axis current of power winding is equal to 0. DSP-TMS320LF2407 is used as the processor to realize all-digital processing of vector control method in this system. Finally, the experiment platform is built and the relative experiments about governing system are also made in the research. Experiment results demonstrate that the designed system is effective.

Related Dissertations

  1. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  2. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  3. Research on Vector Control System of Induction Motor Based on DSP,TM346
  4. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  5. Survey and Analysis of Mycorrhizal Diversity in Zijin Mountain,S718.81
  6. The Research of Control System of Permanent Magnet Synchronous Motor Based on DSP,TM383.42
  7. A Project about Intergrative Control System of Elevator Drive and Power Feedback,TP273
  8. Study of Dynamic Simulation Experimentation on Flexible Power Conditioner Based on Flywheel Energy Storage,TM761.1
  9. Research on Matrix Converter Fed Induction Motor Vector Control System,TM346
  10. Research of the Vector Control for Wound-Rotor Brushless Doubly-Fed Motor,TM346
  11. Design and Implementation on Drive Control System of Industrial Sewing Machine,TP273
  12. Large Scale Wind Power Integration Technology Based on the Vanadium Redox Battery,TM912
  13. Research on Digital Electrical Tracking Control System,TM383.6
  14. Research on Air Gap Flux Oriented Vector Control Techniques of Synchronous Motor,TM341
  15. Wind power wind simulation system development,TM614
  16. Phase permanent magnet synchronous motor servo control system design and simulation,TM341
  17. Switching flux permanent magnet motor three-dimensional finite element analysis and experimental research,TM351
  18. PMSM Vector Control System,TM341
  19. Offshore wind farm application of HVDC technology research,TM614
  20. Based on the DSP2407 brushless DC motor without position control system,TM33
  21. Automotive electric fuel pump with permanent magnet DC motor commutation Performance,U464.136.1

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Permanent magnet motor
© 2012 www.DissertationTopic.Net  Mobile