Dissertation > Excellent graduate degree dissertation topics show

Power Line Carrier Communication System for Distribution Network Automation

Author: ChenJian
Tutor: ZhangYouBing
School: Zhejiang University of Technology
Course: Control Theory and Control Engineering
Keywords: distribution automation PLC spread spectrum communication IT700
CLC: TM76
Type: Master's thesis
Year: 2010
Downloads: 38
Quote: 1
Read: Download Dissertation

Abstract


As the development of china electric power industry, it requires higher efficiency of distribution network automation system (DAS) due to the stronge demand on the quality and reliability of power supply. Firstly the research status and future trend of distribution automation technology is introduced in this paper. Then a mixed communication system project is given based on the analysis of communication technology characteristic in DAS. Finally the power line carrier communication (PLC) system is putted forward detailedly, meanwhile, hardware and software are accomplished.The carrier chip IT700 assortting with china grid, manufactured by Yitran company in Israel, is adopted to the PLC system, and hardware such as coupling, filtering, controlling and interface circuit is designed to support the IT700. Couplling and decouplling of the high frequency carrier signal is realized by coupling circuit using inductive-coupled, subsequently, the filtering circuit extracts the carrier signal from power line signal with rich noise. To cut down the cost of control system, a 51 microcontroller executing initializing, address configuration, data sending and receiving, etc, is advanced in the controlling circuit. The interface circuit includes serial port and Ethernet, the former realizes the communication between host and IT700, while the later realizes the connection between the 51 and internet. It solves the conversion of PLC and internet.The software consists of host computer and microcontroller platform with similar software procedure, it mainly contains subprogram of system initializing, data sending and receiving, serial port and Ethernet, data-base. System initializing majorly deals with software reset and parameters configuration. Sending and receiving program, which encapsulates and unpacks data, in accordance with the agreed communication protocol, is the most crucial program of the software. In order to store and analysis the uploaded data, the data-base module is designed in the host computer platform.Finally, the module testing and integrated testing of the carrier device in the laboratory have been finished. The result shows that the design of PLC system meets the expected requirement and supplies a stable, reliable communication.

Related Dissertations

  1. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  2. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  3. The Roles of Phospholipase C and D in Xylanase-Induced Defense Responses in Suspension-Cultured Rice Cells,S511
  4. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  5. Gantry planer simulation equipment design,TG551.2
  6. The Design of Monitoring System and Experimental Study of the Solar Assisted Heat Pump Unit with Cooling, Heating and Gaining Hot Water,TK511.2
  7. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  8. The Design and Implementation of the Automation Management System of Yongchangjing River,TP315
  9. Design and Optimization Control of the Electroslag Furnace Atomization Automatic Control System,TP273
  10. The Application of Siemens S7-300 PLC to Control System of Process (Laboratory Tank Level),TP273.5
  11. The Design and Study of Control System of Car-type Heat Treating Furnace,TG155.92
  12. Control System Design of the Sewage Treatment Plant Project in Hainan Province Qinglan,X703
  13. Intelligent traffic signal control based on fuzzy logic method and simulation research,U491.54
  14. Realization of Fuzzy-smith Control on PLC and Its Application,TP273
  15. Research on Automatic Measurement Technology of Pitch Diameter for the Rzeppa Joint Housing Raceways,TG80
  16. Fuzzy Control System Design of Transformer Cooler,TP273.4
  17. Huzhou city in the detailed planning of low-voltage distribution network,TM715
  18. Wind power generation pitch system design and application,TM315
  19. Vehicle-mounted snubbing equipment maintenance control system design,TE935
  20. With a small current grounding fault line selection function distribution lines monitoring device design and research,TM862
  21. Energy management control system design,TP277

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system automation
© 2012 www.DissertationTopic.Net  Mobile