Dissertation > Excellent graduate degree dissertation topics show

Equalization Controling Systems for Series Connected Energy Storage Cells Based on Three-Cell Direct Equalization Circuit

Author: XiLingLing
Tutor: YangShiYan
School: Harbin Institute of Technology
Course: Electrical Engineering
Keywords: three-cell direct equalization circuit series connected energy storage cells multi-layer tree structure equalization system CAN bus
CLC: TM910
Type: Master's thesis
Year: 2010
Downloads: 47
Quote: 0
Read: Download Dissertation

Abstract


Power batteries or ultra capacitors are widely used in many fields such as distributed power generation ,UPS and electric vehicles,and so on.Usually they are used in series-connected strings to meet the needs of high voltage power supply.In the long-term use,the performance difference between the cells is inevitable,causing small-capacity ones overcharging and over-discharging,and then resulting in lower effective capacity of the power supplies, reduction of recycle life, and degradation of the safety performance. To carry out the research of equalization systems for series connected energy storage cell strings is of great practical significance. Considering the requirements of the efficiency, speed and system structure, this paper researchs on the equalization circuit ,system structure and equalization control strategy on the basis of analyzing the working principle,the advantages and disadvantages of the existing equalization systems for power batteries or super capacitors.This paper analyzes a novel three-cell direct equalization circuit.This circuit can realize power energy transferring directly between any two ones of three adjacent cells. Analyse the working principle of the circuit,designs the main circuit including the integrated magnetic component and the selection of switch. By proposing three-cell direct equalization structure as the basic module, a multi-layer tree structure equalization system topology based on CAN-bus was build.By applying the mathematical tools of probability analysing,the efficiency performance of the multi-layer tree structure equalization system and the single-layer system based on two-cell direct equalization circuit are compared. The results show that when the system has a large number of cells, the multi-layer tree structure equalization system has significant efficiency advantages.The control system for the multi-layer tree structure equalization system is designed.The three-cell direct equalization controller applying PIC microcontroller as the controlling core including the voltage sampling circuit, drive circuit and the auxiliary power supply is designed. Using CAN bus to realize the co-ordination action of all the equalization modules.The CAN hardware interface and communication protocol are also designed. Each equalizer transmit the voltage data through the CAN bus to the PC,creating a good interactive interface to form a balanced system of monitoring experimental platform.The control software based on top-down equalization strategies is also designed. High-layer equalizers control the on or off action of the corresponding switch to realize equalization.After finishing the process they send the control signal through the CAN bus to the low-layer equalizers to begin equalization.And so on, to achieve the equalization of the whole storage power supply.And then this paper tests the efficiency of the three-cell direct equalization circuit experimentally and carriys out the simulation and experiment of the multi-layer tree equalization system.The results show that the multi-layer tree equalization system has fast speed and the high efficiency.

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  3. Study on the Locomotive Dynamic Supervision System,U284.48
  4. The Inductive Load Based Vehicle Body Network Control System,U463.6
  5. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  6. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  7. Research on High-Performance Computer I/O Bus,TP336
  8. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  9. Development of the Digitizer Based on PCI-E Bus,TP274.2
  10. Design of LXI 1553B Bus Communication Module,TP273
  11. Design of the Main Controller in Automotive Body Network Control System,TP273
  12. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  13. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  14. Research and Design of Web Reports Based on Service-Oriented Architecture,TP393.09
  15. Reform of the civil service positions Consumption,D630
  16. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  17. Application of AWG in Decoy Protection Equipment,TN97
  18. The Study on Site Selection Methods about Bus Transfer Hub at Cross-Harbor Tunnel in Qingdao,U491.17
  19. The Study Intelligent Pressure Transmitter Based on Hart Protocol,TP212.6
  20. Research on Bus Collision and Rolling Simulation Technology,U467.14
  21. The Design and Implementation of Medical Treatment Calling System Based on CAN Bus,TN99

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > General issues
© 2012 www.DissertationTopic.Net  Mobile