Dissertation > Excellent graduate degree dissertation topics show

Disk-Pivot pressure electric drive and other small drive power

Author: ChenXiangYu
Tutor: ZuoXiangCheng
School: Tsinghua University
Course: Materials Science and Engineering
Keywords: piezoelectric micro-motor double rotor FEM modes coupling ultrasonic source
CLC: TM359.9
Type: Master's thesis
Year: 2010
Downloads: 30
Quote: 0
Read: Download Dissertation

Abstract


Piezoelectric ceramics with large power density have been used as transducer in the piezoelectric micro-motors, which can get higher efficiency and output torque. Therefore, new types of piezoelectric micro-motors have been the focus of research field. It can be applied in the fields of precision instrument; bioengineering and other micro actuator systems.A type of disk–pivot piezoelectric micro-motors has been studied and tested in this article. The author made an optimizing analysis of the transducer by FEM. The effect of modes coupling and the frequency separation from one vibration mode were studied. The separation methods of the coupling modes were given.In order to fulfill the required parameters of the motor operation, another type of disk–pivot motor has been designed and fabricated. By offering a more symmetrical structure and employing double rotor driving, the new motor can achieve a better performance. According to the experimental results, the output torque of the new disk–pivot motor is four time larger than the former one.Based on the contrary piezoelectric effect of the piezoelectric ceramic, a new type of linear piezoelectric actuator has been designed and tested. The motor stator also has a structure of disk–pivot. Two ceramic discs are stuck to the out surface of the two disks of the stator. The step vibration can be excitated by the warping vibration of the ceramics. The motor has good prospects for the practical use.A type of ultrasonic source has been fabricated. It can provide the driving voltage for the motor. The source also had the switch to control the positive and reverse working modes.

Related Dissertations

  1. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  4. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  5. Undersea robot plow trenching machine design and analysis,TE952
  6. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  7. Reliability-based Sensitivity Research on Multi-span Rotor System,TH113
  8. Research on Vibro-acoustic Behavior of a Cabin Model with Floating-raft System,U661.44
  9. The mechanical properties of fiber reinforced concrete research and finite element analysis,TU528.572
  10. Water-rich sand and gravel formations Shield Excavation Numerical Simulation of surface subsidence caused by,U455.43
  11. Oil-immersed transformer temperature field numerical calculation and analysis,TM411
  12. Transformer equivalent circuit model based on the process of computing and software development wave,TM41
  13. Dry-type air-core reactor temperature field loss and,TM478
  14. Woven fabrics stab Finite Element Analysis,TS101.923
  15. Permafrost regions semi-rigid steel mesh reinforced Performance,U416.2
  16. Polymer micro- thermoforming key technology research,TQ320.66
  17. Butt welding of hull shapes Numerical Simulation and Optimization,U671.8
  18. Involute spur gear tooth forming cross wedge rolling shaft Quality Research,TG61
  19. Cracks in asphalt pavement structure with finite element analysis,U416.217
  20. Heavy Vehicle Transmission Transmission Parts Performance Analysis and Research,U463.212
  21. Integrated hydraulic excavator hierarchical optimization methods,TU621

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Other
© 2012 www.DissertationTopic.Net  Mobile