Dissertation > Excellent graduate degree dissertation topics show

The Stres Analysis of Armature with Different Structure Shapes During Railgun’s Launch Process

Author: BaiChunYan
Tutor: BaiXiangZhong
School: Yanshan University
Course: General and Fundamental Mechanics
Keywords: Electromagnetic rail launchers Armature Armature structure Finite element analysis Work stress of armature
CLC: TM33
Type: Master's thesis
Year: 2010
Downloads: 17
Quote: 0
Read: Download Dissertation

Abstract


The research of electromagnetic launch technology and related equipment is a hotapot in related fields in recent years, and is a progressive development and a gradual improvement advanced propulsion technology. For the electromagnetic emission process, armature has an improtant effect. An improtant consideration in the design of railguns is keeping good contact between the armature and the rail electrode in the process of launching. Good contact depends on the contact pressure between the armature and the rail. In addition to the mechanical design, the contact pressure but also associated with the structure of the armature. Besides, the structure of the armature has an important effect for the current density distribution and temperature distribution. Concentration of current density distribution in some parts of the armature will lead to high local temperature, cause melting , corrosion and cracking of the rail electrode and the armature material. This paper main uses Maxwell equations and Biot-Savart law, based on finite element analysis software ANSYS, analyzed the influence of the structure and the shape of armature on armature performance and rail performance.First, established the rail-armature model, and calculated the magnetic flux density and electromagnetic force of the armature. Using ANSYS software, established three different shapes of the armature, then, simulated the emission process of railgun, analyzed the contact pressure between the armature and the rail, and compared the characteristic distribution of three armature, finally, come to a resonable armature model. Changed the structure and size of three armature, then come to the influencing regularities of the changes affecting on the contact pressure. After that, electromagnetic analysis of the establishment armature-rail model, analysis the shape of armature affected on the current distribution within the armature and analysis the changes of the electromagnetic force and the temperature characteristics distribution on the armature caused by the current distribution, provided a reference for the structural design of the armature.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  10. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  11. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  12. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  13. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  14. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  15. The Design of Telescopic Asphalt Spraying System,U415.524
  16. Development of Post-process System in Sheet Metal Simulation Based on SolidWorks,TP391.72
  17. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  18. The Structure Design of 2000kN Servo Press for Hot Forming,TG385
  19. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441
  20. Simulation Analysis and Experimental Study on Hysteretic Behavior of High-performance Shear Panel Damper,TU352.1
  21. Three-dimensional Thermal Simulation and Structure Design of Phase Change Access Random Memory,TP333.8

CLC: > Industrial Technology > Electrotechnical > Motor > DC motor
© 2012 www.DissertationTopic.Net  Mobile