Dissertation > Excellent graduate degree dissertation topics show

Study and Design on a Control System of Sensorless Brushless DC Motor Based on DSP

Author: ShuMin
Tutor: FanBingHui
School: Shandong University of Science and Technology
Course: Power Electronics and Power Drives
Keywords: BLDCM DSP sensorless simulation back-EMF
CLC: TM33
Type: Master's thesis
Year: 2008
Downloads: 33
Quote: 0
Read: Download Dissertation

Abstract


Brushless DC motor (BLDCM) is a brand-new mechatronic motor based on the development of power electronics and the advent of new permanent magnetic material. It has been widely used in industrial applications because the advantages of simple structure, high reliability, high power density, high efficiency and good performance, etc. Moreover, sensorless control not only overcomes a lot of disadvantages generated by the sensor, but also expands the application range of brushless DC motor. At present, sensorless control is one of main research directions of control technique for brushless DC Motor. This paper study the design of sensorless control system of BLDCM.Firstly, this paper gives a deep research on basic structure, working principles, gives the mathematical model of BLDCM, and discusses the method of BLDCM rotor position detection which test the back-EMF signal and the plan of the double closed-loop control system is established based on this.Secondly, taking TMS320LF2407A DSP as the core,, hardware electric circuit of the system is designed combined with driver chip IR2130. Simultaneously the position detecting circuit, the inverter circuit as well as the essential protection circuit is designed. The software of the system includes: initialization program of DSP, open-loop commutation start-up program, the phase switching program and soon, which is used to realize each kind of function request of control system.Lastly, Matlab/Simulink is used to conduct the simulation study of BLDCM and its control system. The simulation model of BLDCM is built from the viewpoint of modularization, in which the overall system is separated into multiple isolated functional modules. Simulation results indicate that the rationality of the control system and proved the control system works well as it was expected.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  8. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  9. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  10. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  11. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  12. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  13. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  14. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  15. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  16. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  17. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  18. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  19. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  20. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  21. Numerical Simulation of Biomass Direct Reburning,TK16

CLC: > Industrial Technology > Electrotechnical > Motor > DC motor
© 2012 www.DissertationTopic.Net  Mobile