Dissertation > Excellent graduate degree dissertation topics show

Research on the Vibration Performance of Test-bed and Validation of Impeller Strength for Small Centrifugal Fans

Author: YangLiang
Tutor: ShuChaoZuo
School: Huazhong University of Science and Technology
Course: Chemical Process Equipment
Keywords: small centrifugal fan strength test modal analysis harmonic response analysis
CLC: TK83
Type: Master's thesis
Year: 2009
Downloads: 66
Quote: 0
Read: Download Dissertation

Abstract


With the development of the industrialization in China, centrifugal fan is getting more and more widely used in all fields of national economy. The demand of production and sales of centrifugal fan is very big in the domestic market. The traditional algorithm of centrifugal fan impeller strength check is unable to find out the stress concentration of the impeller. We could only increase the safety coefficient to cut down accidents. It is a waste of resources by this means. With finite element analysis software can be easily solved this problem easily.Because of restrictions of the installation conditions, the impeller, which is designed by our research group, must change into aluminum impeller with the same rotational speed, 2000 rpm, instead of the original steel one, thus the yielding limits is greatly reduced. The ANSYS software is exmployed in this paper to check the impeller strength for small centrifugal fan, and to investigate the maximum stress and the stress concentration place. Then, on the bases of simulation results the impeller design is optimized.Due to the unbalance value of impeller, the vibration during the operation of fan has a great iMPact on environment, which disturbs people to work with a declining efficiency.The fan test-bed model is established by ANSYS. The natural frequency of the system is obtained from modal analysis of dynamics module, which belongs to the software. By means of adjusting model parameters, the natural frequency of module can stay away from the vibration frequency. Then, find out the change mechanism between the model parameters and frequency response curve by transmitting the results of modal analysis to the harmonic response analysis. The harmonic response analysis is applied to find out the relationship between the acceleration response and parameters in the test-bed model. The acceleration response under the vibration frequency of the system is proposed.The results of this paper can be a guideline for the characteristics optimization of the fan test-bed.

Related Dissertations

  1. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  2. Analysis and Evaluation of Some Heavy Truck Drive Axle Housing’s Static and Dynamic Characteristics,U463.218.5
  3. The Design and Research of a New Type of Clamping Elements for Roller Guide,TG659
  4. The Ultimate Load and Dynamic Analysis of Transmission Tower Frame,TM753
  5. Experimental Analysis of Boom Vibration and Stress Calculation of Pipe for 46D Truck-mounted Concrete Pump,TU646
  6. Study on Aseismic of Frame Structure with Weakness Story at Bottom Considering Filled-wall Influence,TU352.11
  7. Parallel six-dimensional shaking table Design and Research,TH762.2
  8. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  9. Direct-drive A / C -axis milling head double pendulum angle structural analysis and performance testing,TG547
  10. Direct-drive A / C -axis CNC universal milling head swivel double Finite Element Analysis,TG547
  11. Car engine mounting system research,U464
  12. Based on the finite element analysis to improve the design of medium-duty truck chassis and Test Research,U463.32
  13. Span steel arch structure seismic performance of,TU352.11
  14. After installation of central brake transmission housing improvement , simulation and experimental study,U463.212
  15. Board structure acousticst sound power modal analysis,U661.44
  16. Baseband chip finger -joint design and research of CNC punch press,TG385.1
  17. Cracks in asphalt pavement structure with finite element analysis,U416.217
  18. Heavy Vehicle Transmission Transmission Parts Performance Analysis and Research,U463.212
  19. Research on the Structural Emission Noise of Axial Piston Pump,TH137.51
  20. Coach Vibration and Structure Modify Study of Base on Finite Element and Actual Road Test,U467
  21. Design and Fem Analysis of Mg Framework of Electric Bicycle,U484

CLC: > Industrial Technology > Energy and Power Engineering > Wind energy, wind machine > Wind machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile