Dissertation > Excellent graduate degree dissertation topics show

Cause Analysis and Solution of Tube Burst Caused by Oxide Skin Peeling on a Supercritical Boiler

Author: XueSenXian
Tutor: LuJiDong;LiuZhiDong
School: South China University of Technology
Course: Power Engineering
Keywords: Boiler Oxide skin Overheating Combustion adjustment Tube burst
CLC: TK228
Type: Master's thesis
Year: 2010
Downloads: 66
Quote: 0
Read: Download Dissertation

Abstract


With the ever-increasing development of electric power construction in China and capacity of power units, supercritical boiler and ultra-supercritical boiler is fast establishing themselves as a first-team regular. As parameters have been improved, oxide skin has more pronounced effects on the safe running of the boiler and steam turbine.Oxide skin is analyzed on formation mechanism and influencing factors in this paper. With some practical examples in domestic power plants, the paper particularly analyzes harms caused by oxide skin peeling. For corrosion of solid particles in steam turbine, the theoretical work focuses on corrosion mechanism, influencing factor and preventive measures.To solve the problem in JinWan power plant, we analyzes from various aspects, including boiler design, operation, metal material, characteristics of oxide skins, law of metal oxide skins peeling and field measurements data of metal oxide skins. The major cause of tube burst in the heating surface was that the final superheater use a large quantity of T23 materials, which overheated for a long time, and T23 overheating caused the peeling and deposit of metal oxide skins of T23 inner wall. The clogging in the lower elbow whose workmanship is inferior can reduce the streaming area. The level of the material of inner ring tubes is the low, and the temperature margin is small. The above two factors cause the tube overheating for a long time, accelerate the formation and peeling of oxide skins, and lead to a tube burst eventually.In terms of combustion adjustment, equipment modification and optimization of startup mode, a comprehensive solution is presented to relieve the formation of metal oxide and prevent metal oxide skin peeling. According to on-site experience, the preventive solution, which has been implemented, reduces effectively the harms of metal oxide skin peeling on boiler in JinWan power plant. The remolding solution, which remains to be implemented, can eradicate the problems of metal oxide skin peeling.

Related Dissertations

  1. Influence of Inclined Secondary Air on Gas-Solid Flows in a W-Shaped Flame Boiler,TK229
  2. Influence of the Secondary Air Angle on the Airflow Field in a Down-Fired Boiler,TK229
  3. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  4. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  5. Design and Study on Absorption Plant of Sulfur Dioxide from Flue Gases,X701.3
  6. Research on Microstructures and Properties of FeMnCrNiAlBSi/Cr3C2 Coatings,TG174.44
  7. The Research and Manufacture on A New Type Heat Pump Water Boiler with Two-stage Heating,TH38
  8. Application of the Wireless LAN in the Industrial Control,TP273
  9. Study on Industrial Boiler Water Level Control System,TP273
  10. The Study of the Comprehensive Utilization of Energy in Carbon Product Enterprises,TQ127.11
  11. Flame Detection of a Marine Supercharged Boiler and Simulation for Drum Water Level Based on Radiative Energy Signal of Furnace,U664.5
  12. Limestone particle size distribution on the CFB boiler desulfurization efficiency impact study,TK229.66
  13. Typical coal and mixed coal on NOx emissions and boiler slagging Numerical Simulation,TK227.1
  14. Large Power Transformers dimensional leakage magnetic field and thermal field coupling analysis,TM411.1
  15. Power transformer stray loss and thermal issues related to the calculation and analysis,TM411
  16. Predicted by the model based on multi- boiler main steam temperature control,TP273
  17. Automated welding boiler membrane wall design and research,TG409
  18. Circulating fluidized bed boiler combustion modeling and optimization control,TK229.66
  19. Research and Application on DCS of Circulating Fluidized Bed Boiler,TP273
  20. The Research on the Purchasing and Supply Plan Matching System for Power Boiler Material,F426.4
  21. Study of Intergrated Membrane System for the Treatment of Oilfields Wastewater,X703

CLC: > Industrial Technology > Energy and Power Engineering > Steam Power Engineering > Steam boiler > Repair, maintenance
© 2012 www.DissertationTopic.Net  Mobile