Dissertation > Excellent graduate degree dissertation topics show

Experimental Study on Low Calorific Value Fuel Gas

Author: ChenFuLong
Tutor: HuangSuYi;JinShiPing
School: Huazhong University of Science and Technology
Course: Engineering Thermophysics
Keywords: low calorific value gas grading fire in recirculation zone burner stable combustion
CLC: TK16
Type: Master's thesis
Year: 2009
Downloads: 62
Quote: 0
Read: Download Dissertation

Abstract


In recent years, energy shortages are all over the world, environmental pollution become worse and worse. The structure of chinese energy is "more coal, less oil and gas shortage", which impedes our coutry’s sustained and rapid economic growth greatly. During the brown coal pyrolysing there is a large amount of pyrolysis gas, the calorific value of which is very low (LHV is about 1200 ~ 1500kJ/kg). For the result of harsh conditiong of ignition and stable combustion, the pyrolysis gas is discharged directly in a long period of time. To alleviate tension in China’s energy, control pollution of low calorific value gas and make good use of low calorific value of gas resources, research and development a efficient and clean combustion technology has an important economic, social and environmental benefits.In this paper the author simulates high and low calorific value gas by using nitrogen mixing in liquefied petroleum gas, and then mixes high calorific value gas into low calorific value gas combustion to achieve utilizing the low calorific value gas. Base on the principle of Grading fire in recirculation zone, we design a new type of burner, do experimental research fuel combustion characteristics and changes in different swirl-flow intensity of air and vary angle of fuel outlet, and obtain a optimal burner structure, which is applicable to combustion of low calorific value gas. Under that conditions, the pyrolysis gas, which calorific value is 1200kJ/kg can combust stability, the heat providing rate between high and low calorific value gas is 21:79. At the same time do a comparative experiment using the acetylene instead of liquefied petroleum gas, the study finds that even at the same calorific value, the combustion effect of acetylene gas is better than liquefied petroleum gas, an analysis reveals the principle of different fuel`s burning characteristic. All these provide a good reference for the technology engineering application.At last, combination actual engineering, the author analyses the feasibility of three schemes of Lignite-Low calorific value gas combustion. Analyst believes that the use of Oxygen-containing flue gas with low calorific value lignite gas combustion has a good practicality and economical efficiency, as well as designes of a corresponding experimental program, which provided a good basis for further research.

Related Dissertations

  1. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  2. Study of Intelligent Soft Sensor Modeling for Furnace Temperature of Coal-Water Slurry Gasifier and It’s Application,TQ546
  3. Ash and Slag Formation in Opposed Multi-burner Coal-water Slurry Gasifier,TQ547
  4. Pilot Plant Experiments and CFD Simulations on an Oxyfuel Burner,TK223.23
  5. Triple burner theory combing,R223.1
  6. Preparation of nanometer silicon dioxide gas burner Numerical Simulation,TB383.1
  7. Structure and Properties of four duct burner,TQ172.9
  8. Research on Methods for Extracting the Features of the Air Flow Field for the Single-Level Burner of a Tangentially Fired Boiler,TK221
  9. Experimental and Numberical Studies on Gas-particle Two-phase Flows in Swirl Burner,TK223.23
  10. Experiments and Numerical Simulation of Coal Ignition by Tiny-Oil Ignition Technology,TK229.63
  11. Experimental and Simulation Study of Gas/Solid Two Phase Flow Characteristics of a Circumferential Bias Swirl Burner,TK223.23
  12. The Research of an Low NOx Coal Burner of Tiny Disturbing Stream and Precessing Jet Flow,TK223.23
  13. Development of New Adjustable Moxibustion Device,R245
  14. Study of Micro Thermophotovoltaic Power System with Flat Combustor,TP211.4
  15. The Numerical Simulation of Flow and Temperature Field in the Car Bottom Type Heat Treatment Furnace,TG155.1
  16. The Experimental Study and Mechanism Analysis of CH4/O2/N2 Combustion Using Femtosecend Laster Induced Plasma,TK16
  17. Experimental Study of Dentate Low-NO_X Coal Burner,TK223.23
  18. Numerical Simulation and Improvement of Concentrated-Thin Swirl Pulverized Coal Burner,TK223.23
  19. The Design and Experiment Project Research of the High Efficiency and Combustion Furnace,TK16
  20. Automatic Control System Research in the Aluminum Smelting and Holding Furnace,TP273

CLC: > Industrial Technology > Energy and Power Engineering > Thermal engineering, heat > Fuel and combustion
© 2012 www.DissertationTopic.Net  Mobile