Dissertation > Excellent graduate degree dissertation topics show

Experiment Investigation of Performances on Mechanics of Fiber-reinforced Chip Seal

Author: LiKun
Tutor: LiYuHua
School: Dalian University of Technology
Course: Municipal Engineering
Keywords: Fiber-reinforced chip seal Mechanics performances Interlayer bonding Tensile test Gradation composition design
CLC: U414
Type: Master's thesis
Year: 2008
Downloads: 145
Quote: 0
Read: Download Dissertation

Abstract


Fiber-reinforced chip seal which is a new preventive maintenance method in china that a thin abrasiceness layer consisting of emulsified bitumen and glass fiber sprinkled by special equipment at the same time and the aggregate sprinkled on the existing road is formed by press of glue wheel road roller and automobiles. And the fiber-reinforced chip seal is able to heal block cracking and increase the performance of waterproof and have better cost efficiency. At the present time the way of the material buildup and constrction quality control about fiber-reinforced chip seal is experiential method. The purposes of this paper are to study the influence factors of interlayer bonding, tensile stress and construction technique parameter for popularizing the application of fiber-reinforced chip seal.The increasing trend is checked which is about interlayer drawing strength of trial road for the fiber-reinforced chip seal by tensile gauge. The degree of press, instrument and method of formation are determined that is to simulate the molding of fiber-reinforced chip seal through current traffic. The results demonstrate the value of the drawing strength is increasing nonlinearly quickly during the early time of construction which, after which the value is increasing slowly and adds up to the peak value.The molding specimen of fiber-reinforced chip seal using track molding instrument is checked by shearing and drawing test which analyses the influence of the dosage of emulsified bitumen and glass fiber, the styles of crack and raveled surfaces for interlayer bonding strength. The results indicate the shearing strength is losing at a rate with the increasing dosage of emulsified bitumen and glass fiber, and the influence that the map cracking is impacting on bonding strength is most serious among the styles of crack in the same crack width, and comparing to normal pavement, though the raveled surfaces make the shearing strength smaller.The tensile strength of fiber-reinforced chip seal band is checked by the tensile test which analyses the influence of the dosage of emulsified bitumen and glass fiber and fiber length. The results show that the tensile stress is increasing at a rate with the increasing dosage of glass fiber and length of glass fiber, and lengthening properly the length of glass fiber may make the tensile strength increasing. This paper also reports the technique parameter of emulsified bitumen and glass fiber and the fiber length in construction by mechanics test which are happening to the interlayer bonding and the band for the fiber-reinforced chip seal.

Related Dissertations

  1. Study on the Mechanical Properties of Pva-high Toughness Cementitious Composites,TU528
  2. Application of the Strai Gauge for Measuring Deformation of Geomembrane in Waste Landfill,X705
  3. Study on Anti-cracking Performance Evaluation Index of Modifided Asphalt Mixtures for Stress Absorbing Layers at Low Temperature,U414
  4. Design of Testing System and Study of Mechanical Properties of Small-scale Materials,TB301
  5. Test and analysis of Stud Connectors in Composite Structure,TU398.9
  6. Study on Estimation for Fatigue Cracked Life of Asphalt Pavement Based on Local Strain,U416.217
  7. Study on the Influence of Metal Plate Angle to the Nail Capacity,TU366.2
  8. The Research of Figuration Properties of 400 Series Cold Rolled Ferritic Stainless Steel Plates,TG142.71
  9. Study on the Notch Sensitivity of K418 and TiAl Alloys,TG115.52
  10. The Study of the Welding Technique for Big Diameter Bent Pipes Forming,TG457.6
  11. Dynamic Constitutive Relationship of TC4 Titanium Alloy,V250.2
  12. Experiment and Numerical Analysis for Fracture Character of RCC Crack Director,TV431
  13. Experimental Research on Tensile Behaviors of Cohesive Soil,TU411
  14. Matching the Design of Hybrid Fiber Composites and an Experimental Study on Mechanical Behavior of Strengthening Structures,TU599
  15. Experimental Study on Circular Fillet Diaphragm-through Joint,TU398.9
  16. Research on Composition Design and Performance of Open-graded Large Stone Asphalt Mixes,U414
  17. Study on the Waterproofing and Bonding Layer of Concrete Bridge Deck,U443.31
  18. The Research on the Behaviors of Concrete-Filled Steel Tube with Gaps under Load,TU398.9
  19. 400 ferritic stainless steel hot rolled plates mechanical properties and weldability of,TG401
  20. Permeable Asphalt Mixture Composition Design and Performance,U414
  21. Experimental Investigation on Mechanical Properties of Polyethylene Pipe Butt Fusion Joints with Process Defects,TG407

CLC: > Transportation > Road transport > Road works > Road construction materials
© 2012 www.DissertationTopic.Net  Mobile