Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation of Turbulent Flows and Spray Mixing Process in the Cylinders of Internal Combustion Engines

Author: DengJie
Tutor: LiDingGen
School: Huazhong University of Science and Technology
Course: Power Machinery and Engineering
Keywords: internal combustion engine Gasoline Direct Injection turbulent flow injection and atomization transient numerical simulation
CLC: TK401
Type: Master's thesis
Year: 2009
Downloads: 110
Quote: 1
Read: Download Dissertation

Abstract


In recent years, within a limited amount of time for computation and using computational fluid dynamics(CFD)methodologies for numerical calculations, the high-speed computers have the capabilities to simulate the overall behavior of the flow field in the engine. They can also predict the performance of an engine by adjusting the engine operational parameters.With the numerical simulation methods, this paper investigated Three-dimensional transient numerical simulation on an practical application in-line, 4-cylinder GDI(Gasoline Direct Injection)engine using professional CFD software--STAR-CD and ES-ICE module.Make the cylinder turbulent flow three-dimensional transient numerical simulation in the compression process(compression spray).The crank angle is between 180°CA~360°CA. Analysis the velocity vector field in the preliminary stage, earlier stage ,Middle period ,near TDC and TDC in the compression process. Compare the result with the experiment date that got from PIV in the same conditions. The simulation results match the experimental results very good.Make the cylinder turbulent flow three-dimensional transient numerical simulation in a large range with the crank angle between -170°CA~360°CA. Through the transient simulation results of the turbulent flow, analysis the process of the turbulent flow process. Change the turbulence model of the STAR-CD and turbulence parameter CMu, analysis the simulation results. The results showed that small changes will have significant impact on the flow field.Make the three-dimensional transient numerical simulation of the fuel injection and atomization process. Analysis the simulation results of the droplet distribution field, air-fuel ratio distribution field, velocity vector field, etc. The result shows that Good cylinder structural design is the necessary conditions for a lean burn. The shearing action of the jet flow come from the spray process is a major factor that impact the cylinder turbulent flow

Related Dissertations

  1. Development and Experimental Study about Virtual Instruments of Vibration Test and Analysis System and Combustion Analyzer,TK407
  2. High Speed Machining Center Milling Machining Parameter Optimization of Internal Combustion Engine Cylinder Block,TG547
  3. The length of the blade Francis turbine research based on CFD,TK733.1
  4. Research of the Improvement of a Small Gasoline Engine Based on CFD,TK412
  5. Numerical Study on Characteristics of Aerodynamic Noise Distribution of an Axial Flow,TH432.1
  6. Internal combustion engine main bearing elastohydrodynamic lubrication,TK421.9
  7. Development of Test System for ICE Exhaust Gas Energy Recovery Based on Rankine Cycle,TK427
  8. Research on Technology of Blind Source Separation Based on Surface Radiation Noise of I. C. Engine,TK401
  9. Study on Multi-body System Dynamics of Engine Valve Train,TK403
  10. Innovative Microwave Ignition in Internal Combustion Engines,TK417
  11. Flat Gate small opening water flow characteristics of numerical simulation and gate slots,TV135
  12. Study on Acoustic Simulation Method and Design Technology of Internal Combustion Engine Exhaust System,TK401
  13. Simulation and Text on the Vibration and Noise of 16V620 Diesel and Study on Each Force’s Effects,U664.121
  14. Noise Souce Identification of I.C.Engine Based on Independent Component Analysis and Wavelet Transform Technology,U464.17
  15. Study on the Transfer Path of Internal Combustion Engine Combustion Noise and Evaluation,TK401
  16. Research on the Noise Identification from I.C. Engine Based on Wavelet Transform and Independent Component Analysis,TB535
  17. The Nonlinear Analysis of Coupled Bending and Torsion Vibration of Internal Combustion Engine Crankshaft,O322
  18. Experimental Study of Ultra-Multi-Hole Nozzle,TK403
  19. Research on NOx SCR Control Systerm of Exhaust for Diesel Engine,TK421.5
  20. The Design of Air Assist Atomizer for Kerosene Internal-combustion Engine,V231.2

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > General issues > Theory
© 2012 www.DissertationTopic.Net  Mobile