Dissertation 

About 226 item dissertation in line with Internal combustion engine query results,the following is 1 to 50(Search took 0.017 seconds)

  1. Design of Test Bed to Dynamic Measure the Injection Effect of Piston Cooling Injector for Internal Combustion Engines,ZhangZuo/Huazhong University of Science and Technology,0/9
  2. Fundamental Research on Conjugate Heat Transfer Modeling for High Power Density Diesel Engine Simulation,ZhangYu/Zhejiang University,0/41
  3. Research on Multi-physics Coupling Simulation Models and Acoustic Optimization Design for Diesel Engines,ZhangHuanYu/Zhejiang University,0/58
  4. Friction and Lubrication Research on Typical Friction Pairs in Internal Combustion Engine Based on Cavitation Theory,LiZhouYu/Tianjin University,0/2
  5. Development of Numerical Simulation for the Process of Two Phases Reacting Flow in Cylinder Based on Unstructured Grids,LiuYongFeng/Harbin Engineering University,0/55
  6. Research on the Dynamics of Piston Ring and Its Effect on the Lubrication Characteristics of Piston Ring-cylinder Liner Frictional Pair,JieXueQian/Hefei University of Technology,0/35
  7. Experimental Study on Boiling Heat Transfer in Cylinder Head Cooling Channels of Internal Combustion Engine,ZhuDongXiang/Huazhong University of Science and Technology,0/7
  8. The Simulation Study on On-board Fuel Reformation of HCCI Combustion Fueled with Methanol,XueLe/Chang'an University,0/8
  9. Dynamic Characteristics Analysis and Reliability Research on168F-O Crankshaft,WangJun/Anhui University of Engineering,0/20
  10. Analytical Investigation on Exhaust Waste Heat Recovery System of Vehicle Diesel Engine Based on Organic Rankine Cycle,YangFuBin/University of North,0/7
  11. Investigation of the Effect of Fuel Reactivity on Combustion Process in a Diesel Engine,OuLiJun/Hefei University of Technology,0/78
  12. Simulation Calculation for Diesel Foot Support Force Based on AVL-EXCITE,HanBing/Dalian University of Technology,0/86
  13. The Design of Fuel Reforming Reactor and Experimental Study on Effect of Syngas Addition on Performance of Internal Combustion Engines,JuBingJie/Beijing University of Technology,0/0
  14. Simulation of Oxygen-enriched Intake Air Combustion in Gasoline Engine,ChenHongFa/Yantai University,0/4
  15. Experimental Investigation on Combustion and Emissions Characteristics of a Hydrogen-blended Gasoline Engine,WangShuoFeng/Beijing University of Technology,0/1
  16. Transient Performance Simulation and Experimental Investigation on Turbocharger Turbine,LiuGuoLiang/Tsinghua University,0/112
  17. Combustion Test and Diagnosis of Dual-Spark Ignition Engine,HuangYongSheng/Chongqing University,0/114
  18. Fundamental Research on Combustion Issues of Natural Gas Internal Combustion Engine,HanXueJiao/Beijing University of Technology,0/1
  19. The Design of Internal Combustion Engine about Data Acquisition and Allalysis System Based on Virtual Instrument Technology,WenMengLin/Nanchang University,0/1
  20. Research for Power Conversion Mechanism of Hypocycloid Internal Combustion Engine,WangJinYou/Taiyuan University of Technology,0/1
  21. Research on Topology Optimization Technology of the Key Structure of Internal Combustion Engine,LiPeng/University of North,0/59
  22. Analysis and Research on Exciting Force of Mechanical Noise in Internal Combustion Engine Caused by the Secondary Motion of the Piston Basing on the Experiment,LiuZuo/University of North,0/78
  23. Research on Hydrodynamic Lubrication of Crankshaft Main Bearings in Internal Combustion Engines,CaoZhongWen/University of North,0/109
  24. Simulation Analysis of Crankshaft System in Internal Combustion Engine Based on Multi-body System Dynamics,DengXiaoXiao/University of North,0/172
  25. Research on the Experimental Recognition Technology of Exciting Force Extraction from Body Vibration of Internal Combustion Engine,LiShuJing/Southwest Jiaotong University,0/28
  26. Design Theory and Critical Technical Research on Variable Load Rate Reciprocating Internal Combustion Engine,ZuoLiMing/Yanshan University,0/30
  27. Research of Parts and Fitting Faults Diagnosis for Internal Combustion Engine,ChenLin/Chongqing University,0/58
  28. A Study on the Lubrication of Piston Ring-Cylinder Liner Friction Pairs Considering Lubricating Oil Transport Status,ZhuHuangLong/Hefei University of Technology,0/46
  29. A Study on the Lubrication of Piston Skirt-cylinder Liner Friction Pairs Considering Lubricating Oil Transport Status,LiYue/Hefei University of Technology,0/57
  30. Research on the Variable Valve System for Hybrid Pneumatic-Internal Combustion Engine,YeJin/Zhejiang University,0/55
  31. Analysis and Research on Characteristics of Internal Combustion Engine Piston Secondary Motion,JieXianLong/University of North,0/69
  32. Research Pertaining to the Applicability of Gaussian Function Windowed STFT to Internal-Combustion-Engine Vibroacoustic Signals,JinYang/Zhejiang University,1/129
  33. Research on the Development of Skeletal Chemical Kinetic Models for Primary Reference Fuel and Gasoline Surrogate Fuel (TRF),LiuYaoDong/Dalian University of Technology,0/104
  34. Research on Multi-physical Coupling Nonlinear Problem and Improved Design of Ring-pack Lubricating Oil Consumption,JingGuoZuo/Zhejiang University,1/215
  35. The Numerical Analysis of Subcooled Boiling in Engine Water Jacket,ZhangDeZhi/Jilin University,0/199
  36. Research on Blind Separation and Noise Source Identification for the Vibro-acoustic Signals of Vehicle and Engine,ZhengXu/Zhejiang University,1/430
  37. Analysis Research on Turbo Generating System for IC Engine Waste Heat Recovery,WeiZuo/Tsinghua University,0/160
  38. Feasibility Study of CCHP Systems in a Neighborhood Project in Changsha Jin-waitan,LvHengXing/Hunan University,0/47
  39. Performance Study of a Bottoming Organic Rankine Cycle for Waste Heat Recovery of Automotive Engine,WangEnHua/Beijing University of Technology,0/34
  40. The Experimental and Numerical Studies of the Heat Insulating Methods for Low Temperature Exhaust Pipe,LuZuoZuo/Lanzhou Jiaotong University,0/76
  41. Knowledge Flow: Theory and Method for Product Design,ZhangZhiNan/Shanghai Jiaotong University,1/534
  42. The Finite Element Method and Its Application in Piston Skirt Lubrication,GuoPeng/Tianjin University,0/31
  43. Research on Performance of Pressure-wave Supercharger for Automotive Engine,LeiYan/Beijing University of Technology,2/355
  44. Study on Combustion Characteristics and Reliability of Gas-to-Liquid Engine,WuTao/Shanghai Jiaotong University,4/352
  45. Improvement of Engine Combustion by Oxidizer Design,XiaoGuangFei/Shanghai Jiaotong University,4/306
  46. Research on Virtual-Prototype-Based Design Method of Internal Combustion Engine Subsystems,PengYu/Zhejiang University,9/760
  47. Research on the Characteristic of Vibration and Acoustic Signals from I.C.Engine Based on Wavelet Transform and Independent Component Analysis,JinYan/Zhejiang University,18/854
  48. Study on Piston Slap and Induced Noise of Internal Combustion Engine,WangPan/Chongqing University,0/461
  49. Research on the Network Theory and Methodology of Lubrication System’s Design of Internal Combustion Engine,TongBaoHong/Hefei University of Technology,5/382
  50. Research on the Working Process of Four-Valve Gasoline Engines for Vehicles Based on Virtual Design,ZuBingFeng/Tianjin University,3/391

Total 5 Pages First Previous 1 2 3 4 5 Next Last

© 2012 www.DissertationTopic.Net  Mobile