Dissertation > Excellent graduate degree dissertation topics show

Dynamic Test and Modal Analysis of Prestressed Reinforced Concrete Truss Beam

Author: ZhangZuo
Tutor: JiangCangRu
School: Wuhan University of Technology
Course: Structural Engineering
Keywords: reinforced concrete truss model analysis ambient excitation parameter identification
CLC: TU378.6
Type: Master's thesis
Year: 2010
Downloads: 36
Quote: 0
Read: Download Dissertation

Abstract


Stucture of prestressed reinforced concrete truss is used widely, which mainly is used in transfer stories and tussed beam bridges. At persent, its static is researched more, but the dynamic is involved less. It not only provides some guides about dynamics, but also gives some references for overall detection, evalution and health monitoring. The method of modal test based on the ambient excitation is used widely because that it does not damage the stuctures which are detected, does not break stuctures’service and it uses economically and feasiblely. The method can provide dynamical feature parameters and accurate original data file of structure exactly. The dynamic properties of proscenium beam in multi-function studio of Anhui Broadcast & Television Centre, whose structure is prestressed reinforced concrete truss strucrure, is tested in the method in this paper, some modal parameterso of beam are got by comparetion between experiment modal analysis and calculating modal analysis, the quality of proscenium beam is detected from dynamical perspect and the reference data also can be provided for the health monitoring and damage identification of beam in future.The main contents included as follows:(1) The basic theories of modal analysis are discussed briefly in this thesis. Vibration equation of multi-degree-of-freedom system is given in the case of three different damping, and the process of time frequency transforms of each equation is deduced. In addition, several modal parameter identification methods are introduced. Especially, the principle and method of pick-peaking is discussed in detail.(2) Vibration test of proscenium beam in multi-function studio of Anhui Broadcast & Television is described in detail under ambient excitation. The plane frequency and damping ratio is identified by using the pick-peaking method. Test shows:the relevant parameters can be identified by the pick-peaking; the parameters can be considered as one of the bases of judging the construction quality of proscenium beam.(3) The initial finite element model of proscenium beam is established, and the modal is calibrated in terms of measured data. From comparative results, the right reference value can be provided. The model can simulate the proscenium beam well and measure the construction quality. It will offer some valuable dynamic reference for health monitoring and damage identification research in the future.(4) Looking from the paper, the dynamic test plan, test steps, the method to simplify the finite element model and the modifying methods can all service as guidance for dynamic measurement in the same kind of structures.

Related Dissertations

  1. Research on Vector Control System of Induction Motor Based on DSP,TM346
  2. Genetic Model Analysis and QTL Mapping of Agronomic and Quality Traits in Soybean,S565.1
  3. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  4. Research Implementation of Crack Detection Method Based on Its Acoustic Property,TP274
  5. Research and Implement of the Theme Crawler for Automotive Industry,TP391.3
  6. Study on the Ductility of Reinforced Concrete Special-shaped Columns with Different Design Parameters,TU375.3
  7. Finite Element Analysis of Seismic Performance of Rc Beams Composite Strengthened with CFRP and Steel Plate,TU352.11
  8. Study on Yield Mechanism of Reinforced Concrete Frame Structure’s Strong Column-Weak Beam under Rare Earthquake Action,TU275
  9. Study of Dynamic Equivalent of Power System Based on Parameter Identification,TM712
  10. Study on Excitation and Speed Control System Modeling and Visualization Parameter Identification Software,TM743
  11. Large CNC spiral bevel gear milling Error Analysis and Compensation Technology,TG547
  12. Domestic and concrete highway bridge design method comparative analysis,U448.14
  13. Reinforced steel mechanical properties of concrete structures,TU398.9
  14. Small Unmanned Helicopter Modeling and Control System Design,V249.1
  15. Domestic and international rail engineering design method comparison,U21
  16. Reinforced concrete structures interfacial debonding damage ultrasonic guided wave detection technology,TU375
  17. Dongjiang Bridge Stiff Suspension Reinforced steel truss construction technology research,U445.4
  18. North Jiangqiao Cheng bridge and construction process force performance analysis,U448.27
  19. Reliability of the Shear Strengthening for RC T-beam Bridge with Bonded Steel Plates,U441
  20. Rapid Evaluation Methods and Analysis Program Development of the Bearing Capacity for Reinforced Concrete Girder Bridge,U441
  21. Application Based on Mode Analysis and Signal Processing in Bridge Detection,TN911.7

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Prestressed Concrete Structure > Trusses and arching
© 2012 www.DissertationTopic.Net  Mobile