Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation of Radial Shearing Interferometric Thermometry for Laminar Ethylene Diffusion Flame

Author: LvWei
Tutor: ZhouHuaiChun
School: Huazhong University of Science and Technology
Course: Thermal Power Engineering
Keywords: flame radial shearing interference Fourier Transform Method numerical simulation
CLC: TP391.41
Type: Master's thesis
Year: 2007
Downloads: 53
Quote: 0
Read: Download Dissertation

Abstract


Laser interferometer technique in the measurement of temperature field for laboratory flame shows the virtue of non-contact、real-time and full field measuring as the same as radiometric image processing technique employed in industrial furnace, but their principles are independent. Laser interferometer technique can be effectively used to test radiometric image processing technique.Cyclic radial shearing interferometric thermometry system offers many advantages such as compact layout, online monitoring, anti-disturbance ability and no reference beam needed.Local concentration of main species must be known in the reconstruction of temperature field. This process is especially difficult for flame due to its unknown fierce chemical reaction. The result will bring obvious error by assuming that local composition corresponds to air. Interferometric thermometry for hot air flow was often reported but rarely for flame.With the numerical simulation data including temperature、density and species concentration for laminar axisymmetric ethylene diffusion flame in setting conditions, optical imaging process such as plane wave’s distortion after flame region and radial shearing Interference of the distorted wavefront were simulated. Radial shearing Interference fringe patterns with series spatial carrier frequency at setting noise level were also made.Using frequency-domain phase shifting method (also called Fourier Transform Method), the distribution of fringe phase difference could be extracted from the simulative fringe pattern which carried bidirectional high spatial frequency. Important parameters such as frequency-domain identification scope、carrier frequency’s intensity and conjugated spectrum bandwidth were quantitatively given during frequency-domain analysis. It shows that frequency-domain phase shifting method for flame can only proceed when carrier frequency’s intensity and fringe resolution meet certain conditions.Refractive index distribution was got after finishing iterative reduction and projection inversion process. Its relative error compared with original value is less than 2 percent generally in flame field. Both the concentration data and the "air assuming" condition were respectively applied to solving temperature field. In this simulation condition it shows that the "air assuming" brings about 5 percent to 10 percent relative error in the upper part and middle part of the flame field. The error increases rapidly from the Lower part to root and the measure result becomes meaningless.

Related Dissertations

  1. Study on Springback of High-Strength Steel Stamping,TG386
  2. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  3. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  4. Development of Explosion Flame Temperature Measurement System Based on Multi-Spectral Thermometry,TH811
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  7. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  8. Influence of Inclined Secondary Air on Gas-Solid Flows in a W-Shaped Flame Boiler,TK229
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491
  21. Research on Dust-Isolation Technology with High Pressure Air Curtain for Mechanized Tunneling Face,TD714.4

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Pattern Recognition and devices > Image recognition device
© 2012 www.DissertationTopic.Net  Mobile