Dissertation > Excellent graduate degree dissertation topics show

The Study and Application of Airflow Distribution in Dust Control of Loading Vehicle

Author: JiangMingHui
Tutor: ShenHengGen
School: Donghua University
Course: Heating,Gas Supply, Ventilation and Air Conditioning Engineering
Keywords: loading vehicle dust resource control edge absorbing hood numerical simulation optimization of airflow distribution
CLC: TU831
Type: Master's thesis
Year: 2010
Downloads: 25
Quote: 0
Read: Download Dissertation

Abstract


In many workplaces, such as coking plant, broken mineral aggregates are loaded from silo to train (vehicles). In this process, the serious dust emission causes "industrial dust storm and dust flow", affects the operation process, and contaminates the environment. With the strengthening of national environmental policies, this kind of dust source is urgent to be controlled.One of the important technical means is to set up exhaust hood to control the dust by optimizing airflow distribution. However, at present the design theory of ventilation and dust removal in this kind of vehicle loading conditions is still immature. Control of dust diffusion in vehicle loading parts is always ignored or is designed by experience, and often the expected results cannot be achieved. Hence, how to choose reasonable and effective airflow distribution is of great significance to control dust diffusion and realize energy saving and emission reduction.In this project, taking the train loading of screen coke building in one coking plant as research object, the control effects of different airflow distributions were discussed.In this paper, optimization of airflow distribution was studied by combining the method of CFD and orthogonal test. RNGk-εmodel and Lagrange discrete phase model were used in the turbulence model and the two-phase model, of which the reliability was validated by the experiment. After simulation analysis on the dust diffusion and the control effects of the existing ventilation and dust removal system, this paper put forward side suction hood and around windshield device ventilation method to control the dust diffusion of dust source. Three different types, unilateral air suction, both side suction, and push-pull, were considered. By analyzing the factors which affects capture efficiency and carrying out the orthogonal test, empirical formulas of capture efficiency were obtained. It could be found that the smallest exhaust volume in complete control of dust was given in unilateral suction, in which the system is simpler and of smaller initial investment. Thus, unilateral suction was determined as the best way of airflow distribution.With the method of specific flux and the theory of dimensionless analysis, the function of the limit specific flux about dimensionless parameters was obtained. Through the test data and empirical formula of unilateral suction capture efficiency, using the software of SPSS V13.0 and doing the multiple regression analysis, the relation of the limit specific flux was given. According to the regression expression of the limit specific flux, optimization of the existing dust source control system was carried out, and the expected effects were achieved, which provides basis for airflow distribution design of dust source control in loading vehicle.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Building Science > Housing construction equipment > Air-conditioning, heating, ventilation,and its equipment > Air-conditioning
© 2012 www.DissertationTopic.Net  Mobile