Dissertation > Excellent graduate degree dissertation topics show

Analysis of Thermal Stress Based on ANSYS Software of Bauxite-based Prefabricated Block Used in Electric Furnace Roof

Author: HeTao
Tutor: KongJianYi；JiangGuoZuo
School: Wuhan University of Science and Technology
Course: Mechanical Manufacturing and Automation
Keywords: prefabricate block of electric furnace roof temperature field stress field finite elementmethod contact pair
CLC: TF748.4
Type: Master's thesis
Year: 2008
Downloads: 193
Quote: 1
Read: Download Dissertation

Abstract


Electric furnace roof is an important device for electric steel making,whose heat preservationperformance and life-span have a direct impact on the economic benefits of iron and steelenterprise.With the appearance of the technology of UHP electric arc furnace steel-making,tradition firebrick roof already can not satisfy the use demand.In this case,a scholar puts forwardan idea of using prefabricated block to install the whole roof.Whether prefabricate block roof canreplace tradition roof depends on the level and the distribution of temperature and stress of them.This paper mainly does the following researches with the object of a 30 t electric furnaceroof of a steel mill.(1)Considered contact behavior between prefabricate block,this paper establishes the completeCAD/CAE model of the electric furnace roof with finite element software based on the theory oftransferring heating subject,and respectively calculates the stable temperature and stress field ofthe firebrick roof and the prefabricate block roof in last melting stage,as is advantageous toanalyze the level and the distribution of temperature and stress of electric furnace roof.(2)Obtains a preferred plan by comparing the temperature and stress field of electric furnaceroof under different casting precepts,that is,when use three pieces of prefabricate block to installthe full electric furnace roof we can get a low strain level in all and the one.Puts forward aproposal to change the shape of the joints between prefabricate block as the contact stress mayaffect the heat preservation performance of electric furnace roof.(3)This paper investigates the effect between the temperature and strain level of electricfurnace roof and the material parameters.Research indicates that they have a trend to change inthe same direction.(4)Considered the characteristics of casting process,this paper optimizes the casting materialparameters using ANSYS optimization module.Research indicates that we can get a betterperformance of electric furnace roof by using appropriate technical means to deploy the ratio ofthe composition of casting material reasonably.To a certain extent,this research provides theoreticalsupport for study of casting material.The research work of this paper plays a certain reference role for understanding thedistribution of temperature and stress of electric furnace roof,manufacturing prefabricate block ofelectric furnace roof,researching and developing casting material property.

Related Dissertations

  1. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  4. Stress distribution law FLAC 3D simulation study,TU452
  5. Research of H-beam Steel after Ultra Fast Cooling,TG335.4
  6. Numerical Simulation and Strength Analysis in Plug-in and Jet-stream Hot-wind Furnace,TF578
  7. The Study on the Vestibular 3d Reconstruction of Guinea Pig and the Numerical Simulation of Temperature Field,R764
  8. Analysis of Rotor Temperature Field of Hydro Generator on Asymmetric Operation Condition,TM312
  9. Research on Temperature Control Feedback of Concrete Dam Based on Distributed Optical Fiber,TV698.1
  10. Reinforced Concrete Beam Flexural Capacity Theory in High Temperature,TU375
  11. Analysis of Temperature, Deformation and Stress Fields of Nuclear Waste Repository in Salt Rock,TL942
  12. Submerged arc welding heat source magnetron roll Numerical simulation and experimental study,TG455
  13. Low temperature detection of arcing contacts,TM572
  14. Permanent magnetic coupling design and key technology research,TN622
  15. Symmetric multi- cell membrane wall weld GMAW welding group norms and deformation analysis,TK226.2
  16. Simulation Model of Sinter Bed Temperature Field and Experts System of Sinter Quality Optimization,TF046.4
  17. Numerical Simulation and Operating Parameters Optimum Research on Aluminum Alloy Melting Furnace and Holding Furnace,TF806.2
  18. Numerical Simulation of the Optimal Flow for Inclusion Removal in Tundish,TF777
  19. Thermal Analysis of Friction Pair of Wet Multi-disc Clutch,TH133.4
  20. Numerical Simulation of Sen Influence in Mold Flow and Temperature Fields,TF777
  21. Study on Two Dimensional Ultrasonic Vibration Grinding Temperature Field Distribution Character of Nano ZrO2 Ceramics,TG580.6

CLC: > Industrial Technology > Metallurgical Industry > Steelmaking > Steel-making furnaces > EAF
© 2012 www.DissertationTopic.Net  Mobile