Dissertation > Excellent graduate degree dissertation topics show

Analytical Behavior of Dendriform Connections to Concrete Filled Steel Rectangular Tubes

Author: GanZhengLi
Tutor: LiuDong；LiZhengLiang
School: Chongqing University
Course: Engineering Mechanics
Keywords: Concrete filled steel rectangular tubes Dendriform connection finite element analysis aseismic behavior
CLC: TU398.9
Type: Master's thesis
Year: 2008
Downloads: 62
Quote: 0
Read: Download Dissertation

Abstract


The bifurcate column together with double-cruciform connections of column to beam form the dendriform connection to concrete filled steel rectangular tubes. Firstly experimental studies on four groups with six 1/2-proportional Specimens are done in this paper. The strain of steel tubes and beam under the static and low-cycle repeated load are accurately measured, and then their curves are obtained. Meanwhile, 3D nonlinear Finite Element Model which all nonlinear effects of material, geometry and contact interface are considered are established. Systematic studies of dendriform connection to concrete filled steel rectangular tubes are done.The comparison of the test data and finite element analysis results show that the FEA results is good agreement with the test data, and verify the correctness of finite element model, Note that the analysis of such complexity connections is feasible with ANSYS. From the load-displacement curve at the end of beam and hysteretic curves which are obtained by experiment and finite element analysis, the aseismic behavior of the dendriform connections are studied.According to the results of finite element analysis, the contours of stress distribution of the steel tubes, the core concrete and the inside clapboards are given in this paper. The structural deformation shapes and weak regional under the load effect can be clearly observed in these figures, and a limitation that the distribution of stress inside of the steel tubes can not be observed during experiment is supplied. The force transmission track, bearing mechanism behavior and failure mode of the dendriform connection are investigated. The analysis shows that when the overall structure is under normal working loads, this dendriform connection is in a flexible state, which is according with requirements. Accordingly, the style of connection is more abundance. The influence on Performance mechanical of the dendriform connection with variation of the axial compressive ratio and the steel tube’s thickness are considered by adjusting finite element model.This thesis puts forward some guarding measures to the limitation of such dendriform connections, in order to provide references for research and designers.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  10. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  11. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  12. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  13. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  14. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  15. The Design of Telescopic Asphalt Spraying System,U415.524
  16. Development of Post-process System in Sheet Metal Simulation Based on SolidWorks,TP391.72
  17. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  18. The Structure Design of 2000kN Servo Press for Hot Forming,TG385
  19. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441
  20. Simulation Analysis and Experimental Study on Hysteretic Behavior of High-performance Shear Panel Damper,TU352.1
  21. Three-dimensional Thermal Simulation and Structure Design of Phase Change Access Random Memory,TP333.8

CLC: > Industrial Technology > Building Science > Building structure > Composite structure > Other composite structures
© 2012 www.DissertationTopic.Net  Mobile