Dissertation > Excellent graduate degree dissertation topics show

Investigation of Device Level MEMS Vacuum Fusion Packaging

Author: LinDong
Tutor: ZhangHongHaiï¼›GanZhiYin
School: Huazhong University of Science and Technology
Course: Subtle manufacturing engineering
Keywords: MEMS Vacuum packaging Vacuum measurement Vacuum is maintained
CLC: TH703
Type: Master's thesis
Year: 2007
Downloads: 196
Quote: 3
Read: Download Dissertation

Abstract


With the development of MEMS technology, costs account for a growing proportion of packaged MEMS devices. MEMS vacuum packaging has been the difficulty in MEMS packaging. Still not mastered the core technology of MEMS vacuum package, can not realize the vacuum packaging of MEMS devices. For these reasons, the National 863 Program approved center application project \To vacuum packaging, first need to measure the degree of vacuum within the small volume of the MEMS device. In this paper, the vacuum degree with the environment and change the principle of resonance resistance of quartz crystal vacuum measurement of MEMS devices. And various effects of a factor of the degree of vacuum measured was studied. The crude leak detection and fine leak detection method of the two detection MEMS device leakage rate leak rate testing devices and vacuum package. Contrast the method of vacuum packaging at home and abroad, China's actual situation, the use of welding package to achieve device-level MEMS vacuum packaging. Vacuum fusion welding of packaging equipment independently developed on the basis of the first metal packaging shell technology research. The theoretical analysis and vacuum packaging the long vacuum device tracking experiments can be found, the existing metal packaging can not be achieved after a long period of vacuum is maintained. Maintain in order to achieve a long and reliable vacuum degree, we designed a dedicated MEMS vacuum package enclosure and vacuum packaging experiments. The shell metal plating vacuum package, suitable metal coating thickness and material. The vacuum packaging of the large quantities of experiments, the yield is more than 90%. After its vacuum packaging casing strength test. A standard vacuum packaging process. Two vacuum encapsulation shell leak rate and the retention time of the degree of vacuum in the theoretically calculated. Through theoretical calculations and actual measurements give a theoretical life span of vacuum packaging a MEMS device. Acceleration experiments, the number of vacuum packaged devices vacuum maintained. The theoretical life given by the two different methods of calculation or less description of MEMS devices to maintain the possibility of prolonged vacuum.

Related Dissertations

  1. Calibration and Application of Inertial Measurement Unit Based on MEMS Gyro,V241.5
  2. Design, Modeling and Fabrication of Micropump Actuated by Laser-induced Shock Wave,TH38
  3. Study on Temperature Field and Residual Stress Model Research of MEMS Accelerometer,TH824.4
  4. Wafer Level Vacuum Packaging of MEMS Device by Solder Sealing,TN305
  5. SHS reaction bonding process research and application,TN405
  6. MEMS-based microfluidic PCR technology system development,TN492
  7. Six -axis micro- accelerometer electrostatic levitation design and system -level simulation,TH824.4
  8. Fabrication of Microscale Ordered-reinforced Composite and Its Mechanical Characterization,TB33
  9. MEMS-based sensor motion capture system development and design,TP212.9
  10. MEMS-based micro- fluxgate sensor technology research,TP212
  11. Six -axis micro- accelerometer electrostatic levitation control system,TH824.4
  12. Integrated Fiber Optic CE System,TN492
  13. Microchannels cavitation research,TH703
  14. Wavelet Analysis Based Signal Denoising Research in MEMS Gyroscope,TN911.4
  15. Research of New Piezoresistive Sensor,TP212
  16. Silicon microphone preamplifier design study,TN722.71
  17. The Research on Micro-assembly Technology of MEMS Fuse,TG95
  18. Design and Noise Analysis of Electrostatic Space Accelerometer Based on MEMS Technology,TH824.4
  19. Intelligent Design of Temperature Compensation of Pressure Sensor Based on MEMS,TP212
  20. Slightly inclined cantilever vibration and shock loads in Reliability Analysis,TP211.4
  21. Theoretic Research on Fiber Accelerometer of MEMS,TP212.14

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > General issues > Structure
© 2012 www.DissertationTopic.Net  Mobile