Dissertation > Excellent graduate degree dissertation topics show

The Research of Pure Electric Vehicle Network Communication Based on CAN Bus

Author: CaiLiXiang
Tutor: WanXiaoFeng
School: Nanchang University
Course: Control Theory and Control Engineering
Keywords: CAN bus the bus network scheduling S3C2440A embedded operating system
CLC: U463.6
Type: Master's thesis
Year: 2010
Downloads: 203
Quote: 0
Read: Download Dissertation

Abstract


With the worsening oil crisis and the deterioration of ecological environment, the pure electric vehicles which have the advantage of energy saving and environmental protection have become the inevitable trend of development of the automotive industry. To this end, stable, reliable and advanced vehicle network communication technology has become the focus research in this area, the research significance is very important. With the purpose of improving the operating efficiency and real-time detection of the pure electric vehicles, the topic has carried out on the vehicle CAN bus communication network research, completed the real-time monitoring of the network node information on the CAN bus, achieved the design of test platform for pure electric vehicles.The vehicle network is mainly based on CAN bus to achieve. Motor control unit, battery management system unit and other small-car power supply device unit are included in CAN bus node. Central processing node receives and sends important information through the CAN bus, the information is sent to the network nodes to be controlled and handled by CPU, at the same time, CPU receives information from the network node, and to judge and treat properly. At the same time, the main node information (speed, mileage, battery cushion, etc.) is displayed on LCD screen by the use of serial communication interface, and realize the intuitive, friendly and real-time display and monitoring of the vehicle information.The automotive network technologies, CAN bus protocol specification, CAN-bus network scheduling methods related to vehicle content are researched in the paper. Based on embedded system, we use S3C2440A chip produced by SUMSUNG companies as the main controller, the purpose for designing and debugging work on hardware and software for the vehicle network has been finished, and has completed the design of graphical display interface, the design of test platform validation of the work. The basic work has been achieved and realized the desired results, to achieve a, and has realized intelligence and networking trend for the pure electric vehicles.

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  3. Study on the Locomotive Dynamic Supervision System,U284.48
  4. The Inductive Load Based Vehicle Body Network Control System,U463.6
  5. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  6. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  7. Research on High-Performance Computer I/O Bus,TP336
  8. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  9. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  10. Development of the Digitizer Based on PCI-E Bus,TP274.2
  11. Design of LXI 1553B Bus Communication Module,TP273
  12. Design of the Main Controller in Automotive Body Network Control System,TP273
  13. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  14. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  15. Research and Design of Web Reports Based on Service-Oriented Architecture,TP393.09
  16. Reform of the civil service positions Consumption,D630
  17. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  18. Application of AWG in Decoy Protection Equipment,TN97
  19. The Study on Site Selection Methods about Bus Transfer Hub at Cross-Harbor Tunnel in Qingdao,U491.17
  20. The Study Intelligent Pressure Transmitter Based on Hart Protocol,TP212.6
  21. Research on Bus Collision and Rolling Simulation Technology,U467.14

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Electrical equipment and accessories
© 2012 www.DissertationTopic.Net  Mobile