Dissertation > Excellent graduate degree dissertation topics show

Analysis and Simulation on Dynamics of a Ejection System and Dynamic Plastic of the Restoring Spring

Author: HuSenQiang
Tutor: ChouYuanYing
School: Xi'an University of Electronic Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: Ejection system Dynamics of multibody system Restoring spring Dynamic plastic FEM
CLC: O313.7
Type: Master's thesis
Year: 2009
Downloads: 29
Quote: 2
Read: Download Dissertation

Abstract


Dynamic characteristic of ejection system and dynamic plastic deformation of restoring spring is researched, which is based on dynamics of multibody system and dynamic plastic mechanics.The comparative study of properties between the multibody systems dynamics analysis and the software solver in classic dynamic problem is performed in this paper. The result shows that it is feasible and reliable to analyze multibody systems dynamic problem by software solver. The virtual prototype of the ejection system is assembled, and the dynamic simulation is made by 3D modeling and dynamic softwares cooperatively. Thus, the impact excitation acting on the restoring spring is obtained, and the dynamic characteristic of the ejection system is acquired.Based on dynamic plastic theory, the dynamic plastic failure of the restoring spring under the above impact excitation is studied by the FEM software. Thereby, the plastic deformation of spring is obtained, and the main reason leading to failure is found. Moreover, a scheme on improving design to reduce plastic deformation of the spring is presented. The research work in this paper has guiding significance to engineering, and provides consultation for design and optimization of ejection system.

Related Dissertations

  1. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  4. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  5. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  6. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  7. Undersea robot plow trenching machine design and analysis,TE952
  8. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  9. The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43
  10. Reliability-based Sensitivity Research on Multi-span Rotor System,TH113
  11. Study on Stamping-forging Process and Experiment of Sheet Metal Parts with Non-uniform Thickness,TG386
  12. Research on Vibro-acoustic Behavior of a Cabin Model with Floating-raft System,U661.44
  13. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  14. Grooves on the surface of the impact of packaging interfacial thermal resistance,TN605
  15. Large aperture telescope primary mirror side support structure optimization,TH751
  16. Hot stamping door impact beams Experimental studies and material properties gradient optimization,U467.3
  17. Tipper Lifting Mechanism and the sub-frame structural analysis and optimization,U469.4
  18. Major component characteristics of the web opening degree Kong Houqiang,U661.43
  19. 9F gas turbine exhaust system architecture design and analysis,TK473
  20. The mechanical properties of fiber reinforced concrete research and finite element analysis,TU528.572
  21. Planetary chipless cutting machine CNC Research,TG659

CLC: > Mathematical sciences and chemical > Mechanics > Theoretical Mechanics ( general mechanics ) > Dynamics > Multibody system dynamics
© 2012 www.DissertationTopic.Net  Mobile