Dissertation > Excellent graduate degree dissertation topics show

The Research of the Wheel and Rail Adhesion Problem

Author: ZhaoWei
Tutor: ZhangJun
School: Dalian Jiaotong University
Course: Vehicle Operation Engineering
Keywords: Adhesion Adhesion Coefficient Wheel-rail Contact Contact Force
CLC: U211.5
Type: Master's thesis
Year: 2010
Downloads: 274
Quote: 1
Read: Download Dissertation

Abstract


Adhesion problem of contact wheel and rail is essentially rolling friction problem, the max longitudinal friction by influence of many cases. Locomotive wheels are disturbed randomly, when the locomotive though straight, turnout, curve, slope, tunnel, rail with slag and without etc. the max longitudinal friction (adhesion force) constantly changing, so locomotive adhesion problem is very complex.According to the lateral displacement of wheels, the seven models of contact wheel and rail are built and the material model of elastic-plastic is chosen. The angle of tangential force and rails longitudinal direction is bigger, more disadvantageous to improve adhesion. According to the tangential force direction, contact spot can be divided into two areas, one is the angel of tangential force and rails longitudinal direction is smaller and the tangential force is bigger near adhesion zone; the other is the angel is bigger and the value of tangential force is not equal.The five models of contact wheel and rail are established so as to the contact angel of outer wheel and rail is constantly changing during the locomotive through curve. The contact spot area between wheel and rail with contact angle increases and decreases; when the contact angle is smaller, adhesive coefficient decreases with increasing of lateral force. Adhesion coefficient increases and decreases with increasing of lateral force under of the larger contact angle.The coulomb friction law has been adopted in calculation of wheel-rail rolling friction, but a large number of engineering experiments proof that it has certain limitation, do not suit calculation of wheel-rail rolling friction. For solving this problem, this paper use of data of static adhesion test, combined with the calculation of wheel-rail rolling friction and find the relationship between these factors and adhesion coefficient, the function express of adhesion coefficient will create eventually.The models of contact wheel and rail are established through parameter variable principle and mathematical quadratic programming, analyzing tangential force, contact angle of wheel-rail, and lateral load on adhesion effects, the ratio of adhesion and adhesion control are improved as theoretical basis. The function of adhesion coefficient which fits computation of contact wheel and rail was created for solving the limitations of the coulomb’s law of friction.

Related Dissertations

  1. Treatment effect and its mechanism of lactose derivatives Gu- 4 in endotoxin shock in mice,R459.7
  2. Research on the Interface Modification of Epoxy Resin/Metallic Substrates and Epoxy Resin/Pigment,TQ630.1
  3. Studies on Behavior of Potato Grafted Starch,TS103.846.1
  4. LPS activation of complement on endothelial cells and the inhibition of complement on LPS- induced acute lung injury,R563.8
  5. α1, 3 fucosyl transferase Ⅳ (Fut4) upregulated increased metastatic potential of squamous cell scc12,R730.2
  6. Gastric CD11c integrin adhesion molecule expression and prognosis,R735.2
  7. Micromanipulation Methods Based on the Adhesion Forces Between Microobjects with Mediated Liquids,TH137
  8. Research on the Adhesion Control Mehtods Based on the Optimal Creep Rate,U211.5
  9. Uncertain System State Estimation and Its Application to Adhesion Control,U260.14
  10. Experimental Study of Wheel/Rail Adhesion Characteristic under Ramp Conditions,U211.5
  11. Adhesion of Lactobacillus Strains Isolated from Swine to Immortalization Neonatal Swine Intestinal Epithelial Cells,S828
  12. Study on the Biological Characterics of Lactobacillus from Different Sources,S816.3
  13. Study on Adhesion Characteristic of Wheel/Rail under Oil Condition,U211.5
  14. Simulation Experimental Research on Wear of Wheel Steel in High-Speed Train,U270.33
  15. Research on FRP-Epoxy Gravel Bridge Deck Pavement Structure,U443.33
  16. Study of Safety Drive on Expressway under Partly Hydroplaning,U491.254
  17. Research on Test Method and Evaluation Indexes about Interlayer Bonding of Asphalt Pavement,U416.217
  18. Research of the Plasma Ion Immersion Implantation and Deposition on 7A04 Aluminium Alloy,TG174.4
  19. Study of Water-borne Laminating Gravure Ink,TS802.3
  20. Study on Influencing Factors of Fly Ash Adhesion Features and Simulating Process of Shell Coal Gasification,X701
  21. Overloaded forging manipulator gripping contact force and dynamic characteristics of,O342

CLC: > Transportation > Rail transport > Railway Line Project > Line theory > Wheel - rail interaction
© 2012 www.DissertationTopic.Net  Mobile