Dissertation > Excellent graduate degree dissertation topics show

Navigation station equipment Remote Monitoring System Research and Implementation

Author: QiaoZuo
Tutor: ZhouXiaoJiaï¼›LuoZuo
School: University of Electronic Science and Technology
Course: Software Engineering
Keywords: Navigation station monitoring Data collection Data transmission Remote monitoring Computer Aided Software Engineering (CASE) Configuration Software
CLC: V351.37
Type: Master's thesis
Year: 2010
Downloads: 42
Quote: 0
Read: Download Dissertation

Abstract


With the increase in air traffic flow, safety and security, increasing pressure to our radio station management work presents new challenges and requirements. ATC equipment navigation station as an important component of the flight path, plays a vital role in its security was of particular importance. \Navigation station itself has over a wide range of features, mostly scattered in remote location, so a navigation device for remote monitoring stations dispersed by centralized management is particularly important and urgent. In recent years, with the continuous development of information technology, remote monitoring as a technical means have been increasingly used in all areas of society. Through remote monitoring technology, can achieve centralized monitoring and navigation equipment, you can always learn dispersed in a remote station equipment operating conditions, the problems found to respond quickly. This is to improve work efficiency, but also greatly ensure the safe operation of the equipment, thereby greatly enhancing the navigation device security capabilities. This article describes the operation of navigation equipment status, combined with the actual situation of the station remote monitoring of the implementation of the transformation of the necessity and feasibility of doing in-depth analysis. The use of computer technology, communication technology and network technology, the monitoring center using a computer network control system for distributed in different geographical navigation devices, set the necessary monitoring points, telemetry, remote control, real-time monitoring equipment operating parameters in order to detect and deal with failure in order to achieve unattended navigation devices and centralized monitoring. In explaining the transformation of the overall ideology, objectives, based on the data acquisition station equipment to Taiwan transformation, the transformation of data transformation and software design techniques, program detailed argument. Proposed station equipment for data acquisition transformation, the transformation of data transmission hardware implementation. Combined communications network conditions, as well as the actual situation of the station reliability, security, manageability, personalized design requirements into account, with the proposed structure of the configuration software development environment monitoring software. Configuration software technology is by calling the modular components to quickly build industrial automatic control system monitoring software tools. Configuration software should be able to support a variety of industrial equipment and common communication protocols, and provides distributed data management and network functions, in addition to achieve the basic data acquisition and control functions, but also provides fault diagnosis, data analysis, report and print form other functions. Finally, to complete the configuration software design and testing validation.

Related Dissertations

  1. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  2. Mobile WSN data collection based on the virtual cluster head Strategy,TP212.9
  3. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  4. The Design of Monitoring System and Experimental Study of the Solar Assisted Heat Pump Unit with Cooling, Heating and Gaining Hot Water,TK511.2
  5. The Design and Implementation of the Automation Management System of Yongchangjing River,TP315
  6. The Design and Implementation of Remote Video Mnitor System Based on Multi-proxy of Video Matrix Control,TP277
  7. The Research and Development of Polycrystalline Silicon Core Manufacturing Operation Simulation System,TQ127.2
  8. Monitoring and control in electric power remote monitoring and control system information model and security mechanisms,TP309
  9. Energy Balance Research in Wireless Sensor Network,TN929.5
  10. The Research and Realization of Human Machine Interface Reconfigurable Communication Based on Embedded Linux,TP11
  11. Large composite structures falling weight impact test technique,TB302
  12. Based on phase sensitive demodulation capacitive coupling resistance tomography study,TP391.41
  13. FPGA-based high-speed data acquisition system design,TP274.2
  14. EPA Industrial Ethernet Configuration Software Research and Design,TP273
  15. Oilfield chemical flooding preparation station monitoring system development and research,TE938
  16. Stacker Training Equipment Operation and Monitoring System,TH246
  17. Data Acquisition System Based on PCI Bus Research and Design,TP274.2
  18. Aviation kerosene quantitative loading system research and design,U294.2
  19. Wideband radar data acquisition and real-time image processing technology research,TN958
  20. Configuration Technology-based Water Pumping Station Monitoring and Management System of the Study Design,TP277
  21. Design and Simulation of Groundwater Monitoring and Repairing Control System Based on Control Configuration Software,X832

CLC: > Aviation, aerospace > Aviation > Airports (stations), the airport and its management > Airport (station ),airport > Ground equipment > Navigation equipment
© 2012 www.DissertationTopic.Net  Mobile