Dissertation > Excellent graduate degree dissertation topics show

Design of CAPF Duty Information Surveillance System Based on Embeded System

Author: YangZongQian
Tutor: DiaoJieTao
School: National University of Defense Science and Technology
Course: Electronics and Communication Engineering
Keywords: Embeded System MCU FPGA SOPC CAPF Duty-fullfillment Information
CLC: TP277
Type: Master's thesis
Year: 2007
Downloads: 60
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of the electron and computer science,the information they bring is increasing and broadcasting with lightning speed . It is the trend that the information is collected and managed in time,then serve the people’s production and life better.This paper is based on requirement of CAPF’s duty-fullfillment, and introduce the design and realization of CAPF’s duty-fullfillment information surveillance and management system that is based on embeded system .The system introduce distributed and modularized design means ,and it collect information of CAPF’s duty-fullfillment sentry post respectively by means of Micro Controller Unit system ,manage the information of sentry post by means of database technology and control duty-fullfillment information sand table by means of SOPC technology which is based on FPGA.This paper introduce the background of system design and design frame firstly , and then analyze and study the whole communication system. Later on it introduce the design and realization on embeded system software and hardware of sentry post teminal、duty-fullfillment information sand table ,and it refer to the technology of embeded system development ,such as Micro Controller Unit development、the embeddability of RISC processor core -- Microblaz in FPGA、the application of EDK tools and so on in this part .Finally this paper introduce the design and realization of duty-fullfillment information software which is based on VB6.0 and ACCESS database.

Related Dissertations

  1. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  2. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  3. Development of LXI Arbitrary Waveform Generator,TM935
  4. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  5. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  6. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  7. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  8. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  9. Design of Wearable Computer’ Multiprocessor Based on SOPC,TP332
  10. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  11. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  12. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  13. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  14. Development of Serial Bus Analyzer Based on Nios,TP274
  15. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  16. Development of Pxibus High Performance Digital I/O Module,TP274
  17. Development of LXI Counter,TP274
  18. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  19. Greenhouse air source heat pump heating systems,S625
  20. The Electrostatic Dust Removal System Based on Microcontroller and LabVIEW,X701.2
  21. Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Monitoring, alarm,fault diagnosis system
© 2012 www.DissertationTopic.Net  Mobile