Dissertation > Excellent graduate degree dissertation topics show

Research on the High-voltage Direct Current (HVDC) Transmission’s Valve Control System Based on C167CR

Author: ZhouTing
Tutor: ZhouDuan
School: Xi'an University of Electronic Science and Technology
Course: Applied Computer Technology
Keywords: HVDC single-chip control CAN-Bus
CLC: TM76
Type: Master's thesis
Year: 2008
Downloads: 50
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of the global power technology, high-voltage direct current (HVDC) electricity transmission technology appears and popularizes fast. The converter valve control technology in HVDC electricity transmission becomes one of its key technologies. The main work of this paper is to design and make the hardware circuit of the HVDC electricity transmission valve control system based on Infineon 16-bit MCU. On the basis of study Infineon microprocessor structure and C167CR’s memory organization, interrupts, parallel IO interface, CAN controller, this paper realizes the hardware circuit of valve control system by using chip hardware resources and related devices.We analyze and research the functional requirements and targets of the HVDC electricity transmission valve control system, discuss how to divide the entire system into function modules in this paper. The working principle of the main chip used to logical control and serial port expansion chip 16C450 has also been discussed. After the circuit design of every function module is finished and the PCB is made, the software and hardware debugging is carried out on each function module, then the entire system is jointly debugged. Finally the hardware circuit has met the overall requirements of the system.

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  3. Study on the Locomotive Dynamic Supervision System,U284.48
  4. The Inductive Load Based Vehicle Body Network Control System,U463.6
  5. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  6. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  7. Development of the Digitizer Based on PCI-E Bus,TP274.2
  8. Design of the Main Controller in Automotive Body Network Control System,TP273
  9. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  10. Research and Design of Web Reports Based on Service-Oriented Architecture,TP393.09
  11. Reform of the civil service positions Consumption,D630
  12. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  13. Application of AWG in Decoy Protection Equipment,TN97
  14. The Study Intelligent Pressure Transmitter Based on Hart Protocol,TP212.6
  15. The Design and Implementation of Medical Treatment Calling System Based on CAN Bus,TN99
  16. Research and Design of HART Communication Module Yston SUPMAX800D Sem,TP273.5
  17. Enterprise Service Bus Based Information Integration System for Die & Mold Enterprises,TP311.52
  18. Study on Control System Integration of CAN Bus Based Carpet Tufting Machine,TP273
  19. Circuit Design and Simulation of Proportional Valve Controller Based on CAN-BUS,TP273.5
  20. Design of the Clutch Control System for Electric Automobile,U463.211
  21. Design and Implementation of Communication System between Double-chips Based on PCI Bus,TN47

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system automation
© 2012 www.DissertationTopic.Net  Mobile