Dissertation > Excellent graduate degree dissertation topics show

The Simulation of Low Concentration of Gas-Solid in the Centrifugal Fan

Author: LiSong
Tutor: GuoRenNing
School: Liaoning Technical University
Course: Fluid Machinery and Engineering
Keywords: Fluent software computational fluid dynamics- centrifugal fan gas-solid two-phase flow the flow field the numerical simulation
CLC: TH442
Type: Master's thesis
Year: 2009
Downloads: 88
Quote: 0
Read: Download Dissertation

Abstract


Centrifugal fan is a general machinery which is widely used in various fields, and improving operation-efficiency of the centrifugal fan will improve the energy’s utilization, and it is very important to research internal flow field of the centrifugal fan for improving the operation-efficiency of the centrifugal fan.In this paper, the commercial CFD software Fluent is used to make numerical simulation of the internal flow field of 2HB-310-H06 type centrifugal fan which is gas-solid two-phase in low concentration, and in the process of simulation, we adopt the finite volume method, the structure of standard triangle mesh and using the SIMPLE algorithm in the basic equations, and the simulation results show that the efficiency of the fan is 80.89%. Numerical simulation results can catch many important internal flow phenomena of the centrifugal fan, and it can predict the important characteristics of impeller flow very well. For the impeller, the pressure is symmetrical, and the maximum pressure is near of the export, the spiral surface and the volute and the minimum pressure appears near the entrance of the non-work impeller. The speed increased first and then decreased gradually in the impeller, and it decreased gradually the spiral, and the lowest speed has appeared in the exit. The numerical simulation results show that the internal flow field of the centrifugal fan exists asymmetry obviously, and the pressure and velocity distribution channel is not the same in each impeller.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  13. The Effect of Frequencycontron on Flow Fields Environment in Bulk Curing Barn and Quality of Flue Cured Tobacco,S572
  14. On the Simulant Research of the Pneumatic Cleaning Mechanism of Mini-combine Harvester,S225.3
  15. Changchun High- temperature low-pressure ridge containing wax reservoir development and technological measures,TE349
  16. Application of Feflow to Groundwater Flow Simulation,P641.8
  17. Study on the Reasonable Cover Thickness of Subsea Tunnel,U459.5
  18. Parametric Design of Flow Channels and Analysis of the Flow Field,TP391.72
  19. Destroy Mechanism Analysis of Big Section Soft Rock Roadway and Research of Engineering Application,TD353
  20. Hydrodynamic Cavitation and Numerical Simulation with CFD,X703
  21. The Design of Optimal Design System of Micro Axial Flow Fans Based on 3-D Flow Field Analysis,TP306.2

CLC: > Industrial Technology > Machinery and Instrument Industry > Gas compression and transportation machinery > Blower > Centrifugal
© 2012 www.DissertationTopic.Net  Mobile