Dissertation > Excellent graduate degree dissertation topics show

Analysis of Reciprocating Seal

Author: LiChuanMin
Tutor: LiuXiaoLing
School: Qingdao Technological University
Course: Mechanical and Electronic Engineering
Keywords: reciprocating seal finit element contact pressure thermal effect geometrical polyurethane friction
CLC: TH136
Type: Master's thesis
Year: 2010
Downloads: 59
Quote: 0
Read: Download Dissertation

Abstract


Four problems have been investigated in this thesis, i.e., finite element analysis of the structural mechanics of seal, fluid lubrication of rod seal, reciprocating sealing mechanism, and frictional experiment on polyurethane sealants.Firstly, Software ANSYS 12.0 was used to establish the three-dimensional model for representative lip-seal. The stress distribution on seal and on interface was simulated during the seal assembling, fluid pressure loading, instroke and outstroke of hydraulic cylinder. Distribution regularities of stress on seal and on interface were concluded according to the calculation result.Secondly, a lubrication model for rod seal was established based on parallel gap , mechanism of fluid lubrication for seal was studied assumed that the temperature of the moving surface is constant and the static surface is adiabatic. The thermal effect and the geometrical wedge effect of microstructure.were given. Results show that the dynamic oil film pressure was determined by the geometrical wedge under isothermal conditions, so dynamic oil film pressure couldn’t be created between two smooth parallel surfaces. However, dynamic oil film can be formed when the relative sliding speed is high enough and the thermal effect is included. For the rough seal surface under thermal condition, the formulation of oil film pressure distribution was attributed to the comprehensive action of the geometrical wedge by asperity and the thermal effect.Thirdly, refering to frictional test on reciprocating flexible seal conducted by Kaneta, et al. and others, cross sectional model of seal was established to analyze the lubricant film formation mechanism during instroke and outstroke of hydraulic cylinder, a method for calculating the distribution of pressure and temperature in various cross sectional wedgelike gap was presented, and the influence of different cross sectional shape on sealing effect was discussed for both instroke and outsroke per cycle.Lastly, influence of contact pressure, relative sliding speed, and lubrication state on friction and wear properties of new-type polyurethane was studied by experiment. Discontinious sliding occurred during the dry friction motion between the block and the ring. The lubricant film was easily formed on the interface as long as the lubricant oil exists, and the friction force was influenced significantly by interface temperature in the process of the experiment.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Global Stability of Telescopic Boom with Impact of Lap between Booms and Friction,TH211.6
  3. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  4. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  5. Research on Facial Feature Extraction and Matching Algorithms for Image Retrieval,TP391.41
  6. Design and Implementation of Space Rendezvous and Docking Linear Movement Simulator Control System,TP273
  7. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  8. Research on Servo Control System of Gyro-Stabilized Platform,TJ765
  9. Synthesis and Biocompatibility of different types of hydrophilic surface - modified polyurethane,R318.08
  10. Study on the Lubricity of Rape-seed Biodiesel and Its Blends with Diesel Oil,S232.6
  11. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  12. Study on Technics & Performance of Nano Electroless Composite Plating on 20~# Steel,TQ153
  13. Research on PSA/Cotton Blend Fabric of Coatinging of Water Resistance and Moisture Permeability,TS195.6
  14. Prototype Development of Intimate Apparel Mannequin,TS941.2
  15. Synthesis and Properties of the new anti-clotting material in modified ammonium phosphate zwitterion,R318.08
  16. Preparation and Application of Water-based Polyurethane to Improve Wet Rubbing Fastness,TS193.2
  17. The Synthesis and Properties Research of High Hydrophilic Polyurethane,TQ323.8
  18. Research on Facial Recognition of China Ethnic Minorities,TP391.41
  19. Non-phosgene Synthesis of Polyurethane Elastomer,TQ334.1
  20. Synthesis and Properties of Functional Waterborne Polyurethane Coatings,TQ633
  21. UV-curable waterborne polyurethane acrylate oligomers,TQ630.1

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Other mechanical components
© 2012 www.DissertationTopic.Net  Mobile