Dissertation > Excellent graduate degree dissertation topics show

Theoretical Analysis and Experiment Research of Movable Hydraulic Pumping Station

Author: ZhangJianSong
Tutor: WangCunTang
School: Jiangsu University
Course: Mechanical and Electronic Engineering
Keywords: movable pumping station kinematics analysis hydraulic system parameter matching heat balance
CLC: TH137.51
Type: Master's thesis
Year: 2008
Downloads: 42
Quote: 0
Read: Download Dissertation

Abstract


Pumping station is common equipment in large water resource and hydropower engineering. The characteristics of the fixed-style pumping station are large capability and more investment. They are located in certain place for water supply and drainage after installation, and play an important role in flood fighting and draining. However, because of some disadvantages, people need to exploit moving pumping station with high maneuverability as necessary complement. According to this situation, theoretical analysis and experiment research of a new movable hydraulic pumping station is provided in this paper.Firstly, the pumping system lifting mechanism of movable pumping station is designed, the motion of lifting system is analyzed, and kinematics equation of this action is proposed. Based on the equation, the displacement, velocity and acceleration are analyzed, and the key motion parameters curves of the mechanism is plotted by MATLAB, work space of the system is calculate. Further, dynamics analysis of the mechanism is done, and method of choosing proper cable wire is provided.Secondly, the principle to the hydraulic system of movable hydraulic pumping station is designed. Based on analysis of working process, transform and conversion of energy are analyzed during the system working. The paper also addresses the matching principle among Hydraulic motor, Hydraulic pump and diesel engine. The main performance parameters choice of each element is provide, and analyze working range of these elements.Thirdly, this paper studied the working performance of water pump; and pointed out the methods of determining working point. The experiment data of movable hydraulic pumping station is obtained in test bench and validated theory analysis. According to the experiment results, the optimal working point is established.Finally, theory analysis to the heat balance system of hydraulic system is done, and the submerge cooling tube fitted for characters of movable hydraulic pumping station is designed, and the structural design on the sucker is finished with the best cooling effect.

Related Dissertations

  1. Undersea robot plow trenching machine design and analysis,TE952
  2. Sham hose drum drive means and hydraulic system of the structure,TE973
  3. The Design of Telescopic Asphalt Spraying System,U415.524
  4. Design and Research on Numerical Control Simulation Test-bed of Lifting Hydraulic System,TH702
  5. Aluminum AC pulse MIG welding with,TG444
  6. Ceramic press the development of large flow proportional throttle,TH137
  7. Concrete pumping system hydraulic shock and stroke deviation Optimization,TU646
  8. Research for the Characteristics of Slewing Control Valve on Truck Crane,TH137
  9. Investigation into the Aircraft Hydraulic Platform with Multi-pumps and Systems,V227.82
  10. Study on Hydraulic Shift Actuator of Automatic Mechanical Transmission,U463.212
  11. Support hydraulic valve test system fault diagnosis software reliability study,TH165.3
  12. The Design and Analysis of Constant Tension System of the Hydraulic Winch Drive System,TH21
  13. Sliding Loader Hydraulic Systerm Analysis and Design,TH243
  14. The Research of the Kinematics Optimization and Trajectory Planning of a Six DOF Robot,TP242
  15. Research and Design on Jacking System of the Jack-up Platform,P752
  16. Calculation of Exergy Loss and Study of Loss Decreasing Strategy for Pyrometallurgical Smelt System for Fe-Ni,TF644
  17. The Mechanical-Hydraulic Co-Simulation of the Hydraulic Support and the Analysis of Hydraulic Control System,TD355.4
  18. Reacher on the Hydraulic Control System of Roadheader Robot,TD421.5
  19. 2m to 3 remote underground scraper powertrain and implementing agencies design,TD632.2
  20. Research on the Lifting Equipment of Wind Turbine Monopole Foundation,TM315
  21. Research and Design of 30-ton Bulk Materials Self-unloading and Semi-trailers,U469.53

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Hydraulic transmission > Hydraulic components > Hydraulic motors,hydraulic cylinders and pumps
© 2012 www.DissertationTopic.Net  Mobile