Dissertation > Excellent graduate degree dissertation topics show

Mechanism Design and Dynamics Analysis of a MRI-guided Surgery Robot

Author: GuoJie
Tutor: YangZhiYong
School: Tianjin University
Course: Mechanical Engineering
Keywords: Magnetic resonance imaging (MRI) Needle insertion surgeryRobot Kinematics analysis Dynamics analysis
CLC: TP242
Type: Master's thesis
Year: 2012
Downloads: 4
Quote: 0
Read: Download Dissertation

Abstract


This paper is focused on the magnetic resonance imaging (MRI) guided needleinsertion robot for prostate brachytherapy. The mechanical subsystem of the robot isdeveloped and the kinematics and dynamics of the robot are researched. The maincontents contain the selection of the robot structure material, drive method and sensor,mechanism design, kinematics and dynamics modeling and so on. Combined with thecontrol system which has been established, acupuncture experiment to the robot forkinematic accuracy is verified. The main research contents and achieved results aredescribed as follows:Firstly, in order to meet the design requirement of MRI-guided prostate needleinsertion surgery robot, polyformaldehyde (POM) is chosen as the main material forthis robot prototype, and hierarchical modular design is adopted for integral structureof the robot. MR compatible encoder is selected for the mechanism position sensor,and hybrid drive method with combination of pneumatic and ultrasound motor isemployed, realizing the adjustment of needle space pose.Secondly, base on the robot kinematic analysis, the forward and inverseequations and Jacobin matrix are deduced, and then the workspace of the robot iscalculated, verifying the rationality of robot design theoretically. A dexterityevaluation index which gives attention to the mechanism and workspace dexterity isdeveloped, and an optimal kinematics performance evaluation index which minimizesthe global and comprehensive conditioning number is proposed. The kinematicdimensional synthesis is carried out by the above methods and the main dimensionalparameters of the optimal structure are obtained.Finally, Lagrange method is used for establishing the dynamic model of therobot. Base on the model and the frictions between main kinematic pairs, the cylinderdrive force is analyzed in the process of the mechanism motion. Needle insertionexperiments are conducted to verify the correctness of mechanism kinematicsderivation and control theory, and evaluate the needle insertion accuracy of themechanism at the same time.The research results of this paper have high theoretical significance and practicalapplication value. The research results have a certain exploratory significance in the design of MRI-guided surgical robot. The results described in the paper also lay goodfoundations for the following up work.

Related Dissertations

  1. Research and design of gate door module,U231.6
  2. The Application of STIR-FLAIR and T2W-SPIR for Diagnosing the Orbital Lesions: a Contrast Study,R777
  3. Application of Functional MR Imaging in Diagnose for Prostate Cancer,R737.25
  4. The Kinematic Analysis on Backward-slides-step-shot-put Technique of Elite Female Shot - Putters of China,G824.1
  5. Analysis and Research of Six-dof Relding Robot Motion Control Accuracy,TP242
  6. Analysis and Simulation System of Industrial Robot with Six Degrees of Freedom on Path Generation,TP242.2
  7. Virtual Prototype Modeling and Kinematic and Dynamic Analysis of Self-Walking Gantry Construction Robot,TP242
  8. Paver Screed device operating characteristics of,U415.521
  9. Study on Mechanical System Design of Weighty Payload and High Accuracy Antenna for Radar Satellite,V443.4
  10. The Research of the Kinematics Optimization and Trajectory Planning of a Six DOF Robot,TP242
  11. The Experimentation Study of the Speciality Silt Sedimentation and Integration on Two-phase Flow Separation Device,TU991.24
  12. The Development and Application of Down-hole Tools to Improve the Cementing Quality of Sidetracked Wells,TE925.2
  13. Technology Research on the Structure Performance of Rhombus Motor Frame,U483
  14. Dynamics Analysis and Research on the Major Girder of 900t Bridge Erecting Machine,U445.36
  15. Research of a Innovative Laser-welded Parallel Mechanism Structure and Performance,TP242
  16. Design and Analysis of Robot in Robot Experts Remote Monitoring System,TP242
  17. The Research of Tight Curve Radius of Ballastless Track Strucure of Passenger Traffic Railway,U213.244
  18. The Theory Profile Analysis and Dynamics Analysis of Parallel Indexing Cam Mechanisms,TH112.2
  19. Research on Programmed Kinetostatics Analysis for Parallel Manipulators Based on Ordered Single Opened Chains,TP242
  20. Kinematics and Dynamic Analysis on Three Degree of Freedom Parallel Patform,TP242
  21. Mechanism Analysis and Simulation Research on Quadruped of Hybrid Elastic Drive,TP242

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot
© 2012 www.DissertationTopic.Net  Mobile