Dissertation > Excellent graduate degree dissertation topics show

High-speed gear fault diagnosis based on full vector spectrum technology

Author: GongXiaoZuo
Tutor: HanJie
School: Zhengzhou University
Course: Mechanical and Electronic Engineering
Keywords: Full vector spectrum Gear fault diagnosis Full vector power spectrum Full vector cepstrum Full vector Hilbert demodulation
CLC: TH165.3
Type: Master's thesis
Year: 2009
Downloads: 35
Quote: 2
Read: Download Dissertation

Abstract


Gear transmission system are most widely used as motion and load transform part in all kinds of machines and equipments, which dynamical performance and ability have significant effects on the machines and equipments. In order to improve the transmission efficiency, the system is tended to design to run in high-speed and heavy-load condition. The vibration, noise and distortion caused by high-speed and heavy-load can severely influence the safety and stability of the machine. It is instant to carry on the study on the dynamical property and fault diagnosis of gear transmission system.The property of high-speed gear is different from the ordinary gear. When the high-speed gear device is smoothly running, motion and power is transmitted through high meshing frequency. The state of vibration and impact can be changed by wear, pit, error of manufacture and installation as well as condition of high-speed and heavy-load transmission. Therefore, it is important to correctly detect the fault of gear system. However, as for the traditional condition monitoring and fault diagnosis of gear only based on the single-source vibration signal, thus it leads to the incomplete and unreliable information. Full vector spectrum method based on the same source data fusion of rotary machinery was put forward and applied into the fault diagnosis of high speed rotary gears.Information fusion technology has been made achievements in the equipment fault diagnosis fields, and most of the studies are based on characteristics of rotating machine. The numerical algorithm, spectrum illustration and advancement of full vector spectrum are well introduced. Full vector spectrum analysis technology is featured by being comprehensive, direct and easy to be exploited.The major topics are to study high-speed gear and achieve the fault diagnosis of gear through its rotor and gear meshing vibration information fusion. By using full vector spectrum technology, the vibration information can be more correctly and more reliably reflected. Using the method of full vector power spectrum in the fault diagnosis of gear can achieve comprehensive information and high resolution. It is effected for fault of wearing, fitting etc. As far as modulation sources with complex gear fault signal, full information cepstrum analysis method can identify the cycle of the complex spectrum. Full vector Hilbert demodulation analysis method based on the same source data fusion of rotary machine is put forward in order to suppress the noise and demodulation the signal. After careful theory discussion, the new method above is proved to be effective. Full vector Hilbert demodulation technology has greatly improved the condition monitoring and fault diagnosis of gear. Practices show it is of great superiority.Based on the full vector spectrum technology, the study of fault diagnosis of high-speed gear don’t only advance the further development of the theory of information fusion system, but also rich the gear and the whole gear box diagnostic system. At the same time, they will improve the diagnosis of gear and gear box efficiency and open up new areas of accuracy.

Related Dissertations

  1. A full vector rotation for rotating machinery,TH165.3
  2. Research and Application of Granular Computing Based on Rough Sets in Data Mining,TP311.13
  3. Study of Improved EMD and Its Application in Gear Fault Diagnosis,TH165.3
  4. The Analysis of the Failure Mechanism of the Gears Based on Time-frequency Theory,TH165.3
  5. Wavelet Analysis Used in Micro-gear Fault Diagnosis and Research,TH165.3
  6. Research Gear’s Fault Pattern Recognition Based on BP Neural Network,TH165.3
  7. The Fault Diagnosis to the Gearbox of Wind Power Based on the Vector Spectrum,TH165.3
  8. Full Vector Spectrum Based Fault Diagnosis Methods for Gear System,TH165.3
  9. Study of Vibration Fault Diagnosis on Low Speed and Heavy-duty Gear,TH165.3
  10. Vibration Analysis and Diagnosis on the Fault of the Gear and Rolling Element Bearing,TB535
  11. Research on the Fault Diagnosis of Mechanical Gearing System Based on the Testing of the Torsion Vibration,TH113.1
  12. Study on the Faults Diagnosis Expert System for Gear Transmission,TH132.41
  13. The Expert System of Gear’s Fault Diagnosis Based on Neural Network,TH132.41
  14. Wavelet Packet Analysis’s Application in Gear Fault Diagnosis,TH132.41
  15. The Research on the Convenient On-line Fault Diagnosis System of the Railway Motorcycles’ Traveling Part,U279.3
  16. Gear Fault Diagnosis Based on Wavelet Analysis,TH132.41
  17. Rolling and gear vibration signal analysis and fault diagnosis,TP14
  18. Gear Faults Diagnosis Based on Wavelet Neural Network,TP277
  19. Study on the Automatic Check & Sub-selecting System for Detecting Bearing Rings of Missing Procedure,TH165.2
  20. Development of Flexible Manufacturing Teaching System,TH165-4
  21. Band Entropy Method and Its Application to Fault Diagnosis of Rolling Bearings,TH165.3

CLC: > Industrial Technology > Machinery and Instrument Industry > Machinery Manufacturing Technology > Flexible manufacturing systems and flexible manufacturing cell > Fault diagnosis and maintenance
© 2012 www.DissertationTopic.Net  Mobile