Dissertation > Excellent graduate degree dissertation topics show

Simulation Study on Drop Impact of Military Product Packages

Author: YangZhenBo
Tutor: LiShiZuo
School: Kunming University of Science and Technology
Course: Mechanical Design and Theory
Keywords: Drop impact Finite element Dynamic response Numerical simulation Torpedo’s package
CLC: TB487
Type: Master's thesis
Year: 2010
Downloads: 88
Quote: 0
Read: Download Dissertation

Abstract


Military product packages is suffering from drop, shork, vibration and so on inevitably druing circulation process. Drop impact is the main cause of damage, so it is necessary to quest the damage state of military packages caused by drop impact. One of the method of questing the damge state of the transport package is using the product to do the experiment. But the experiment is usually destructive and doing the experiment is expensive; moreover the experiment is uneasily controlled, and physical quantities which are measured are limited. And it is difficult to display the response and vibration deformation mechanism of the structure during the dropping process. One of effective way to solve this problem is using computer software to simulate analysis. To aim at above problems, the article did the dropping simulation analysis about military torpedo’s packages.Firstly, the author sums up relatively the basic theory of impact dynamics and comes out with the general analysis way and the process of solving, thus founding the theoretical base for numerical simulation. Then the author combines the basic equation of impact dynamics with Non-linear finite element theory based of MSC.Dytran and establishes the analysis method of drop/impact load.Secondly the torpedo’s package was meshed with the software Patran which belongs to MSC company. The finite element model has been finished according to the element types, material model and load. Besides, the author has analyzed and discussed the problems encountered in the modeling.Thirdly based on the non-linear software MSC.Dytran, the drop impact of the torpedo’s package has been simulated and analyzed, we can get the impact of the the torpedo and process box impact, stress and energy over time to respond to the situation; the author intensive analyzed the movement and potential failure type of the torpedo, and found out the weakness in structure designing and further helped improve or optimize designing after synthesizing these analysis results; Analysis also can be drawn through the torpedo of packages to meet the national requirements of the impact resistance requirements.Finally, the influence of drop impact parameters (velocity, position) is analyzed. From the study, we find that the torpedo force is affected by drop parameters. We can change the drop parameters to improve the situation of torpedo force.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. EDM Electrode Wear Mechanism and Control Research,TG661
  7. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  8. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  11. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  12. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  13. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  14. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  15. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  16. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  17. Numerical Simulation of Biomass Direct Reburning,TK16
  18. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  19. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  20. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  21. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23

CLC: > Industrial Technology > General industrial technology > Industrial common technology and equipment > Packaging Engineering > Packaging technology testing
© 2012 www.DissertationTopic.Net  Mobile