Dissertation > Excellent graduate degree dissertation topics show

Analysis on Structure and Performance of the Ejector in Vapor Compression/projection Refrigeration System

Author: WangZuo
Tutor: ZhangDaLin
School: Nanjing University of Aeronautics and Astronautics
Course: Machine and Environmental Engineering
Keywords: ejector ejector factor numerical simulation experimental study refrigeration system
CLC: TB657
Type: Master's thesis
Year: 2009
Downloads: 83
Quote: 0
Read: Download Dissertation

Abstract


It is economically and effectively to use ejector in the vapor compression refrigeration system as a throttling device. The main performance parameters of ejector is ejector factor , which can improve the performance of system when fit. At present, there are three approaches to study the ejector: theoretical computation, numerical simulation and experimental study, among which experimental study is basically and widely used . At the foundation of theoretical computation results, this thesis will first conducted numerical simulation and experimental study to design and test the ejector , and then test a cooling system with the designed ejector.As followings are the main research works in this thesis: 1.Get the initial structure parameters through the listed way, and based on which, there would be several structure parameters of the main nozzle and mixer for simulation. 2. Numerical simulation method was used to model and calculate the flow in the ejector, and its distribution of pressure and velocity were studied. The effects of diffusion angle of the main nozzle and the diffuser, diameter and length of the mixer on the ejector performance were compared, and then the high-side pressure. 3. Test the manufactured R134a refrigeration system test-bed with the designed ejector and on which analyze the effects of the ejector .

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study of Method and Facilities for Transfering from Hot Air to Exhaust Air Converying System,TK223.25
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  20. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  21. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13

CLC: > Industrial Technology > General industrial technology > Refrigeration Engineering > Refrigeration machinery and equipment > Refrigeration Equipment
© 2012 www.DissertationTopic.Net  Mobile