Dissertation > Excellent graduate degree dissertation topics show

Simulation of 16V240ZJB Diesel Engine Working Process

Author: LiChunYe
Tutor: DuRongMing
School: Dalian Maritime University
Course: Marine Engineering
Keywords: Diesel engine Model Heat release rate Numerical Simulation
CLC: TK421
Type: Master's thesis
Year: 2001
Downloads: 372
Quote: 13
Read: Download Dissertation

Abstract


On basis of 16V240ZJB diesel engine , the establishment of the cylinder and the exhaust pipe of the physical and mathematical models . Pressure on the exhaust pipe within the volumetric method , the calculation of the exhaust gas turbocharger . Calculation program , first determine the initial parameters are known , then apply the Runge - Kutta method to solve the differential equations , calibrate mode simulation results . This paper discusses the impact of several parameters on the heat release rate in the course of their work , and traction characteristics on the part of the conditions of the calculation . Can be seen on the calculation result and the comparison of the measured parameters , both quite consistent . That the model established model and calculation method is correct , and can be used for further study of the models and similar models .

Related Dissertations

  1. Research on Magnetic Field Sensor Based on GMI Effect and Geomagnetic Matching Algorithm,P318
  2. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. EDM Electrode Wear Mechanism and Control Research,TG661
  7. Experimental Study on Pyrolysis and Combustion Characteristics of Paint and Tar Based Single Hazardous Wastes,X705
  8. Powered Activited Carbon-UF for Treating Micro-polluted Surface Water,X703
  9. Design and Research on Stabilization Loop of Gyro Stabilized Pod Control System,V241.5
  10. Satellite Attitude Control Methods Using Only Magnetorquers,V448.222
  11. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  12. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  13. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  14. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  15. Research on Models and Simulation of Electromagnetic Railgun Exterior Trajectory,TJ399
  16. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  17. The Technological Parameter Analysis and Influencing Factor Research on RUV4 Automobile Ignition Coils,U463.64
  18. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  19. The Research of Residential Community Design of Vanke Model,TU984.12
  20. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  21. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Diesel engine > Theory
© 2012 www.DissertationTopic.Net  Mobile