Dissertation > Excellent graduate degree dissertation topics show

Computer Simulation of the Process of Two-dimension Metal Cutting and the Optimization of the Geometry Parameter of Cutting Tool

Author: ZhaoJiWen
Tutor: XieFeng
School: Hefei University of Technology
Course: Mechanical Manufacturing and Automation
Keywords: Metal cutting Number imitation FEM Virtual design
CLC: TH164
Type: Master's thesis
Year: 2002
Downloads: 549
Quote: 13
Read: Download Dissertation

Abstract


The paper based on the idea of the virtual design, simulated the process of the orthodoxy metal cutting through the technology of number imitation which based on the general international large software ANSYS precisely and vividly. With this method, this paper analysised the form of the shearing area and the change process of the stress and strain, and acquired the distribution of the contact load of the cutting tool with which we studied the distribution of the stress of the cutting tool. We carried through some imitation tests with the varying parameters of the cutting tool, through which we optimized the geometry parameter of cutting tool and carried out some studies of other respects. Through this way of the virtual design, we studied the cutting tool of the nano-TiN modified cermets material which was manufactured by the Hefei university of technology, with the problem of geometry parameter of cutting tool as the emphases.

Related Dissertations

  1. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  4. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  5. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  6. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  7. Undersea robot plow trenching machine design and analysis,TE952
  8. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  9. The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43
  10. Reliability-based Sensitivity Research on Multi-span Rotor System,TH113
  11. Study on Stamping-forging Process and Experiment of Sheet Metal Parts with Non-uniform Thickness,TG386
  12. The Layout Simulation Design of New Wall Materials Production Line,TB491
  13. Research on Vibro-acoustic Behavior of a Cabin Model with Floating-raft System,U661.44
  14. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  15. Grooves on the surface of the impact of packaging interfacial thermal resistance,TN605
  16. Large aperture telescope primary mirror side support structure optimization,TH751
  17. Hot stamping door impact beams Experimental studies and material properties gradient optimization,U467.3
  18. Tipper Lifting Mechanism and the sub-frame structural analysis and optimization,U469.4
  19. Major component characteristics of the web opening degree Kong Houqiang,U661.43
  20. 9F gas turbine exhaust system architecture design and analysis,TK473
  21. Design and Development of a CAD/FEA Seamless Integration Platform CAFIP,TP391.72

CLC: > Industrial Technology > Machinery and Instrument Industry > Machinery Manufacturing Technology > Mechanical computer-aided manufacturing
© 2012 www.DissertationTopic.Net  Mobile