Dissertation > Excellent graduate degree dissertation topics show

Signal detection and processing system of the laser head

Author: ZhouXiaoBo
Tutor: GuoChengAn
School: Dalian University of Technology
Course: Electronics and Communication Engineering
Keywords: optical pickup actuator magnetic circuit magnetic induction intensity movement sensitivity
CLC: TP274.4
Type: Master's thesis
Year: 2002
Downloads: 121
Quote: 1
Read: Download Dissertation


The optical pickup is a key part of digital optical disks. In order to further develop the techniques of digital optical disks and optical drivers, the optical pickup technology must be developed first. In present, however, the optical pickup technology of our country lays behind the advanced technology of the world. Therefore it is very important for us to develop the optical pickup technology. The actuator is the key part of the optical pickups. It is also the accurate servo driving mechanism of the optical system, and one of the important research subjects in the optical pickup field as well.In this thesis, the principles of optical pickup signal detecting and process system are analyzed in detail with emphases on the actuator magnetic circuit design and the computation of the magnetic induction intensity in working gap of the actuator. In the 4. 5S optical pickup design, in order to solve the problems of low movement sensitivity and high JITTER values, an optimum magnetic circuit structure is designed for the actuator according to theoretical analysis. The experiment results show that, for the new actuator, the focus movement sensitivity increases 70%, the tracking movement sensitivity increases 10%, and the requirement for the overall performance of the system has been achieved.

Related Dissertations

  1. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  2. The Technological Parameter Analysis and Influencing Factor Research on RUV4 Automobile Ignition Coils,U463.64
  3. Design of Control System for Laser Beam Steering Device,TM301.2
  4. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  5. Heilongjiang Province in Northeast Asia Economic and Trade Development Zone Construction Research,F127
  6. Development of Electric Actuator Servo System,TM921.541
  7. The Research on the Design of Magnetostrictive Negative Stiffness Damper,TU311.3
  8. HDD head positioning system-related technology research,TP333.35
  9. Asymmetric high-voltage isolation switch mechanism design of the motor windings,TM303
  10. 12kV vacuum circuit breaker Improvement of permanent magnetic actuator,TM561.2
  11. CNC high -speed scanning technology research YIG filter,TN974
  12. High voltage circuit breaker permanent magnet motor actuator controller design,TM561
  13. Vacuum circuit breaker module power system electromagnetic compatibility and reliability design,TM561.2
  14. A Research of Proportion Pneumatic Actuator Based on On/Off Valve,U664.36
  15. The Research on a Novel Repulsion Actuator with Permanent Magnetic Holding Structure,TM351
  16. The Design of the ILS Stimulation,V241.4
  17. A Kind of Five Dof Parallel Machamisms with Two Compound Active Legs Study,TP242
  18. Modeling and Parameter Identification for Pneumatic Control Valve Stiction,O361.3
  19. Research on Design and Test of Electromangetic Actuator of Diesel Engine,TK423
  20. Electrically Controlled Electricity Actuator Automatic Transmission Electricity Functional Element Feasibility Study,U463.212
  21. Study and Design on High-Reliability Eletro-Machanical Actuator,V249.1

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Centralized testing and roving detection system
© 2012 www.DissertationTopic.Net  Mobile