Dissertation > Excellent graduate degree dissertation topics show

Three Dimenslonal Numerical Simulation of Mlxed Regenerator

Author: CaiJianXiang
Tutor: ShenJinLin
School: Zhejiang University
Course: Materials Processing Engineering
Keywords: Glass furnaces of generator Numerical simulation Numerical module
CLC: TQ171
Type: Master's thesis
Year: 2002
Downloads: 101
Quote: 0
Read: Download Dissertation

Abstract


Numerical simulation is one of the most important methods to reduce the fuel consumption and raise the efficiency of glass furnaces.Based on the understanding of the regenerator.the numeric module of the temperature field and the heat flow through the glass furnaces regenerator has been established and ifs solbing method has been worked out on which the feasibility and the calculation of the valuation index of the effect of the heat.The selection of brick,the construction,the diaxneter.thedimension, and the thick of brick has been discussed,diagram has been drawn for the reference ofoptimum design of the glass furnace regeneratorafter the discussion of the relationships of the effection of heat.In this paper,a practical 3 dimensional mathematical model of cirulation and heat transfer in the generator of glass melting furnaces was formulated.The model was based on the heat transfer between the smoke flow and the lattice units,the air flow and the lattice units.This model not only got over the diffcultv of complicated computation of heat transfer process in regenerator of glass furnaces,but also avoided the irrationality caused by fixing the temperature distribution on the surfaces.Based on above.we can get very important datas and also the method of design regenerator of the glass furnaces.Also we can design the better effficient one through the conparisons.It’s very important to the practical production.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Chemical Industry > Silicate > Glass Industry
© 2012 www.DissertationTopic.Net  Mobile