Dissertation > Excellent graduate degree dissertation topics show

Study of Analyse Experiment of the Particle Board’s Elasticity Modulus by Micro-Mechanics

Author: LinLanHua
Tutor: XingLiPing；WangPing
School: Northeast Forestry University
Course: Mechanical Design and Theory
Keywords: particle board elasticity modulus micro-mechanics analyse experiment
CLC: TS61
Type: Master's thesis
Year: 2002
Downloads: 79
Quote: 1
Read: Download Dissertation

Abstract


Elasticity modulus is main rference to particle board 、 oriented strands board 、 reconstitued wood will be used in the framwork and construction , so it is more important that theory study of particle board’s elasticity modulus、 analyse experiment and numeration simulation of computer.This paper based on the composite mehanics’s micro-mechanics theory , approximately theoretical evaluation was deduced and micro-mechanics model was founded of these particle board’s elasticity modulus , that supplied theory and method to mathematics stimulation calculation ; and discussed analyse step and experiment method , the exemplar’s elasticity modulus of particle board、orientated particleboard 、scrimber was tested , the experiment conclusion of orientated particleboard and scrimber was analyzed , that works out the computer simulation software based on it, in the end, look into the distance of this study .Through these theories , we can set the quantitative mathematics relation of the variety of these particle boards、 geometry size、 rubbers 、 felting angel and it’s error、 particle’s mechanics reference、, compression ratio、 capacity etc. and board’s elasticity modulus, realizing the theory forecast of the elasticity modulus of the new type boards.

Related Dissertations

  1. Study on the Produce Technology of Bamboo-mat Reinforcing Bamboo Particleboard and the Characteristic Property,TS653
  2. Damping properties of ceramic matrix composites research,TB332
  3. Metal / ceramic system 3D micro- cell structure of Construction and micromechanics,TB33
  4. Meso-analysis and Application of Yield Function of Pressure-sensitive Materials,O344.1
  5. Research and Application of Reinforced Concrete Equivalent Material,TU375
  6. The Mechanics Behavior of Epoxy Resin Composites Filled by Nano-Rubber Particles,TB383.1
  7. Study on Oxidation Mechanism and Mechanical Properties of ZrB2-SiC Ceramic at High Temperature,TQ174.14
  8. Properties Prediction of Brittle-Short Fiber Matrix Composites Based on Micromechanics Theory,TB332
  9. Analysis of Hydration Kinetics and Prediction of Elastic Properties of Cement Based on a Micromechanical Model,TQ172.1
  10. Micromechanics-based Method for the Tubular Condenser Analysis,TQ051.5
  11. Micromechanical analysis of crystalline polymer,O631.1
  12. The particle-reinforced polymer based VCFEM macro-micro dual scale simulation,O631.3
  13. The Finite Element Analysis of Mechanics Properties of the Carbon Nanotube Reinforced Magnesium Matrix Composite Material,TB332
  14. Numerical Simulation of Mechanical Properties and Microscopic Structure of the Polypropylene Fiber Concrete,TU528.572
  15. Study on Viscoelastic Properties of Asphalt Mixtures Based on Micromechanics,U414
  16. Micromechanical Model and Finite Element Analysis of Bamboo,TU531.3
  17. Research on Theory and Application of Homogenization of Composite Materials under Large Deformation,TB332
  18. An Invesitigation of Small Strain Shear-Modulus Anisotropy Based on Experiments and Numerical Smulation,TU411.3
  19. The Mix Proportion Research on Durafiber Plastic Concrete,TU528.041
  20. Mesoscopic Numerical Simulation and Test Study on Concrete’s Size Effect,TU528
  21. Micromechanical Study on the Mechanical Characteristic of the Skeletal Muscle Epimysium,Q6

CLC: > Industrial Technology > Light industry,handicrafts > Wood processing industry,furniture manufacturing industry > Theory
© 2012 www.DissertationTopic.Net  Mobile