Dissertation > Excellent graduate degree dissertation topics show

EXPERIMENTAL STUDY ON FRAME JOINTS BETWEEN CONCRETE -FILLED STEEL TUBULAR CORE COLUMNS AND PRESTRESSED CONCRETE BEAMS UNDER REVERSED CYCLIC LOADS

Author: FanYeShu
Tutor: DengZhiHeng；ZhangXiDe
School: Guangxi University
Course: Structural Engineering
Keywords: concrete-filled steel tubular core columns prestressed concrete frame joints reversed cyclic loads test Seismic behavior hysteresis loops
CLC: TU378.2
Type: Master's thesis
Year: 2002
Downloads: 170
Quote: 8
Read: Download Dissertation

Abstract


The concrete-filled steel tubular core column, which is a new type of member, has been proposed to be applied to prestressed concrete frames in this paper. In the frames concrete-filled steel tubular columns intersect beams at joints. The joints synthesize advantages both of concrete-filled steel tubular core columns and of prestressed concrete beams. This paper attempts to research the seismic behavior of joints between concrete-filled steel tubular core columns and prestressed concrete beams under reversed cyclic loads, in order to make the joints become a good kind of seismic system. Five specimens have been designed and tested, among which four specimens are frame joints between concrete-filled steel tubular core columns and prestressed concrete beams and one specimen that is a contrast is a joint between a reinforced concrete column and a prestressed concrete beam. Based on the experimental results , the mechanical behavior and the failure modes of specimens under reversed cyclic loads have beeb depicted, the principal indexes of strength, the stiffness of joints, the ductility and the energy dissipation have beenanalyzed. The influences of the steel tubes on the failure modes of specimens, on the shear strength of core area of joints, on the stiffness of joints, on the ductility and on the energy dissipation. Meanwhile, both the function of concrete-filled steel tubular core columns in raising aseismic strength and the hysteretic behavior of joints specimens have been studied. In addition, the failure modes , the strength, stiffness, the ductility and the energy dissipation of the joints between concrete-filled steel tubular core columns and prestressed concrete beams, of have compared with those of the joint between a reinforced concrete column and a prestressed concrete beam. Based on the results of experimental research, we can find that the construction method of joints zone are feasible and safe, the joints between concrete-filled steel tubular core columns and prestressed concrete beams have good ductility and good energy dissipation, and the concrete-filled steel tubular core columns can raise the shear strength of core area of joints and the bending strength of the column ends.

Related Dissertations

  1. Research of the Performances of Ferroelectric Film and Compositional-Graded Ferroelectric Film,TM221
  2. Preparation and Properties Research of Ba0.8 Sr0.2 Tio3 /CoFe2O4 Multi-iron Thin Films,O484.1
  3. Domestic and concrete highway bridge design method comparative analysis,U448.14
  4. Prestressed concrete bridge damage detection and evaluation methods,U448.35
  5. Varying analysis considering shear lag effects of variable cross-section PC cantilever box girder,U448.213
  6. PC box girder creep effect analysis based on ANSYS secondary development,U448.35;U441
  7. Dynamic Reliability Evaluation of Existing Prestressed Concrete Bridge Based on Bearing Capacity,U441
  8. The Numerical Analysis of the Crack of Prestressed Concrete Continuous Box Girder Bridge in Cold Area,U448.213
  9. Study on Mechanical Property of Prestressed Concrete Girders Strengthened with CFRP,U441
  10. Study on the Factors Which Influence the Pre-stressed Concrete Bridges Cracking and Down-warping,U448.35
  11. Across two-way hollow plate structure finite element analysis,TU375.2
  12. An Experim Ental Study on the Seismic Behavior of Recycled Concrete Frame Columns with Different Axial Compression Ratios,TU375.4
  13. Experimental Study on Vertical Bearing Behavior of Prestressed Concrete Pile in Not-weak Soil Layer,TU753.3
  14. Research on Soil Plugging Effect on Bearing Capacity of Prestressed Concrete Pipe Pile,TU473.1
  15. Finite Element Analysis of Lateral Resistance of Prestressed Concrete Frame with FRP Tendons,TU377
  16. Experimental Research on Mechanical Behavior of Retard-bonded Partially Prestressed Concrete Beams,TU378
  17. Experimental Study on Seismic Behavior and Nonlinear Analysis of Flexiable Connection Infill Wall Frame Structure,TU352.11
  18. Z-shaped Column Frame Joint Experimental study and nonlinear finite element analysis,TU375.4
  19. Experiment and Finite Element Analysis on Seismic Behavior of Steel Beam-Column Connections Without Weld Access Hole,TU391
  20. Experimental Study on Seismic Performance of 240 Reinforced Block Masonry Shear Wall,TU311.3
  21. In-service Prestressed Concretegirder Bridge Detection Evaluation Methods,U446

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Prestressed Concrete Structure > Girder
© 2012 www.DissertationTopic.Net  Mobile