Dissertation > Excellent graduate degree dissertation topics show

Research on Optimum Design of Plantary Gear Transmission Mechanism for Cutterbar

Author: LiLuJun
Tutor: LvXinMin
School: Northwest University of Science and Technology
Course: Mechanical Design and Theory
Keywords: transmission of cutter bar planetary gear transmission optimization design simulation finite element analysis
CLC: TH132.41
Type: Master's thesis
Year: 2011
Downloads: 132
Quote: 1
Read: Download Dissertation


Cutter bar transmission which performance capabilities have a direct impact on the combine harvester work quality and efficiency is the important component of combine harvester. The crank pin institutions and pendulum institutions are widely used on the domestic combine harvester at present. But these institutions has common drawbacks that they may lead cutter bar damage by vertical force or horizontal force. In contrast, the planetary gear transmission which can avoid vertical force or horizontal force has advantages of less abrasion, smart structure, and higher reliability. In conclusion, It is a trend that the planetary gear transmission replaces pendulum transmission. So far, planetary gear transmission which only adapted in the Deutz-Fahr combine harvester is rarely involved in the researching and design. Therefore, it is very necessary to do research and design on planetary gear transmission.Aim to avoid the drawbacks of cutter easily broken and reduce vibration because of vertical force or horizontal force, the paper designed planetary institutions using optimization designing methods , completely analyzed and verified the plausibility and reliability of the planetary institutions.Using the optimize toolbox of Matlab software, the planetary transmission was optimum designed. Under the help of the Pro/E ,a famous modeling software, 3d model was created ,virtually assembled and dynamics simulated according to the optimize parameters. To verify the reliability of the design, static analysis was conducted in accordance with the actual conditions in Ansys software.The dissertation consists of the following contents and results:(1)Taking Dongfanghong 4LZ - 2.5 combined harvesters as an example , analyzed the motion law of pendulum ring box transmission mechanism, and the motion law of the planetary gear transmission mechanism. Obtained the parts size conditions which meet the reciprocating linear motion.(2)Established the mathematical model with the most compact in structure for target and the size to realize cutter bar movement,the rules of planetary gear design, the rated capacity as the constraints . (3) Calculated the results using Matlab GA optimization Tool-box and get the optimization parameters according to the actual situation.(4) Created three-dimensional models and parts of virtual assembly by Pro/E software to verify the correctness of the component size. Completed movement simulation function to get cutter bar movement curve. Compared with the pendulum institutions movement to verify the rationality of design .(5) Verified the correctness of the optimization design result by the finite element analysis for bending strength, according to the planetary gear transmission mechanism in low speed and heavy work conditions.The results indicate: the movement of the optimization design planetary gear institutions was simulated by Pro/E software which shows its movement character near to pendulum institutions, and finite element analysis of the bending stress shows the designed planetary gear institutions meet the required strength , it is concluded that its design size is feasible. After a series of CAD, CAE technology design, it is proved that the designed planetary gear transmission has good work performance and reliability.Then it improved the force situation and avoid the problem that cutter bar break,which improved combine harvester work efficiency.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. EDM Electrode Wear Mechanism and Control Research,TG661
  8. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  9. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  10. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  11. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  12. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  13. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  14. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  15. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  16. Numerical Simulation of Biomass Direct Reburning,TK16
  17. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  18. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  19. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  20. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  21. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > The transmission mechanism > Meshing > Gears and gearing
© 2012 www.DissertationTopic.Net  Mobile